motorcraft or wixI will start the troubleshooting with your oil filter, what brand are you using?
the lifters were new, tried marvel oil, CD detergent, only thing that works is moble 1 syn 5-20w and only for about 2-3k mi. i didnt retorque my aluminum head and gasket is seaping coolant. I will be having head re done and mill the required .300 off the lifter boss to convert to solid lifters .Maybe you should try a heavier weight oil? The lifter could be bad, also the cam could be worn out, too. If you think it is an oiling problem, you could try some to use a cleaner, but you do that stuff at your own risk.
Crower cams said hyd cam w/ solids will be louder, ramps are different. after talking about my combo and smog ability, i went for it and ordered a street able solid roller cam. .475 278/282, 242/246 @.050 114 lc. I installed it and was able to check int open @ .050 on my crank deg [ 11 btdc]. lash .o1o/ .o12 . reset idle speed and has nice rumpity idle. it did run warmer so i had it dyno checked and he upped the fuel curve. they feel larger injectors may help as it still is lazy. now it pulls to 6000 no prob. soon inj swap
Crower cams said hyd cam w/ solids will be louder, ramps are different. after talking about my combo and smog ability, i went for it and ordered a street able solid roller cam. .475 278/282, 242/246 @.050 114 lc. I installed it and was able to check int open @ .050 on my crank deg [ 11 btdc]. lash .o1o/ .o12 . reset idle speed and has nice rumpity idle. it did run warmer so i had it dyno checked and he upped the fuel curve. they feel larger injectors may help as it still is lazy. now it pulls to 6000 no prob. soon inj swap
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?