I used that exact carb for about 5 years, on a variety of different intake manifolds. I think that this would be a perfect match for a Weiand Stealth, and on Holley's website they even list this is one of the ideal carb matches for that manifold.
I ran this carb on my 289 with AFR 165cc heads, and it was fine. People tend to over-carburate, and you don't need much bigger than a 600 or 650 even on a 302. If you stroke the 302 (to 331 or 347 I assume) and go with the AFR 185cc heads, than....yeah, this carb might be a little on the weak side. It's reliable enough for a daily driver, but can be used street/strip. If I was running a stroker 302 motor with AFR 185s, I'd probably go for a racier carb, like a Holley with screw-in air bleeds, a secondary metering block, etc (which the 80457S carb doesn't come with, but isn't needed on a mild build). But, if you stay on the more tame side of things, even with AFR 165cc heads, I think you'll do fine with this carb.
Good luck.
p.s. due to the modular nature of Holley's, even if you got this carb and at some later date wanted to go wilder, you could get a 34-6S secondary metering block kit so you could run jets in the rear as well, in addition to a whole host of other little mods with Holley parts that can essentially turn it into a different carb.
I ran this carb on my 289 with AFR 165cc heads, and it was fine. People tend to over-carburate, and you don't need much bigger than a 600 or 650 even on a 302. If you stroke the 302 (to 331 or 347 I assume) and go with the AFR 185cc heads, than....yeah, this carb might be a little on the weak side. It's reliable enough for a daily driver, but can be used street/strip. If I was running a stroker 302 motor with AFR 185s, I'd probably go for a racier carb, like a Holley with screw-in air bleeds, a secondary metering block, etc (which the 80457S carb doesn't come with, but isn't needed on a mild build). But, if you stay on the more tame side of things, even with AFR 165cc heads, I think you'll do fine with this carb.
Good luck.
p.s. due to the modular nature of Holley's, even if you got this carb and at some later date wanted to go wilder, you could get a 34-6S secondary metering block kit so you could run jets in the rear as well, in addition to a whole host of other little mods with Holley parts that can essentially turn it into a different carb.