• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Line Lock Wont Hold

  • Thread starter Thread starter snoboardcore
  • Start date Start date Apr 17, 2006
Prev
  • 1
  • 2
First Prev 2 of 2
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
Apr 28, 2006
#21
  • Apr 28, 2006
  • #21
oh yea you can smell clutch the car hardly goes up a hill rolling at 60 on the highway because we took it to the track and smoked the clutch. When i push the brake hold the button then push the break again no more pressure goes in the pedal goes right down to the floor again. The floor is where i set it originally.
 

JimBowy

Member
Nov 8, 2003
330
0
17
Downriver, Mi
Apr 28, 2006
#22
  • Apr 28, 2006
  • #22
snoboardcore said:
oh yea you can smell clutch the car hardly goes up a hill rolling at 60 on the highway because we took it to the track and smoked the clutch. When i push the brake hold the button then push the break again no more pressure goes in the pedal goes right down to the floor again. The floor is where i set it originally.
Click to expand...

well go fix it
 
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
Apr 29, 2006
#23
  • Apr 29, 2006
  • #23
clutch is already ordered but i need to figure out this line lock problem
 
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
Apr 30, 2006
#24
  • Apr 30, 2006
  • #24
alright well i just tried bringing the revs up and the hitting the brake and then the line lock. It seems to hold it better but still wont stop the car completely and it still rolls. Think this could be because of drag slicks on the street and the street is warm?
 

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0
Nov 19, 2005
815
5
18
mooresville, nc
Apr 30, 2006
#25
  • Apr 30, 2006
  • #25
check to see if your vacuum check valve is bad. the pedal shouldnt go to the floor when you hit it. also check the brake booster. with the car off pump the brakes until it gets hard, keep pressure on the brake and start the engine, the pedal should drop an inch or so, if it drops more the booster is bad or if it doesnt drop it is bad. there could be a leak in the master cylinder also, which would cause the pedal to slowly drop to the floor when its being applied.
 
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
Apr 30, 2006
#26
  • Apr 30, 2006
  • #26
dragnazz5.0 said:
check to see if your vacuum check valve is bad. the pedal shouldnt go to the floor when you hit it. also check the brake booster. with the car off pump the brakes until it gets hard, keep pressure on the brake and start the engine, the pedal should drop an inch or so, if it drops more the booster is bad or if it doesnt drop it is bad. there could be a leak in the master cylinder also, which would cause the pedal to slowly drop to the floor when its being applied.
Click to expand...

even though im only vacing 10 because of my cam it still shouldn't go to the floor?
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

R
8.8 rear end for '67 coupe, shortened - next steps
  • rubendenver
  • Dec 15, 2024
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
730
1965 - 1973 Classic Mustangs -General/Talk- Jan 8, 2025
GOvert
G
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
Brakes ATS Upgrade & Rear disc Brake issue
  • Kabuki_notch
  • Apr 26, 2023
  • Fox 5.0 Mustang Tech
Replies
17
Views
3K
Fox 5.0 Mustang Tech May 12, 2023
Kabuki_notch
WTB/Trade Looking for a T-Top Hatch. Possible convertible trade? (Rhode Island)
  • 7upper
  • Mar 18, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
319
Fox Body Mustangs For Sale (1979-93) Mar 18, 2025
7upper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?