• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

LineLock installed ,pics here

  • Thread starter Thread starter Slow5.0
  • Start date Start date May 26, 2006

Slow5.0

Active Member
Feb 13, 2003
2,554
0
46
Portland, OR
May 26, 2006
#1
  • May 26, 2006
  • #1
I installed Summit LineLock http://store.summitracing.com/partd...0000&N=4294922533+4294920388+115&autoview=sku
Installation wasn't that bad except i had to made3 trips to AutoZone because off wrong fittings, but i gotit done


 

Attachments

  • IMG_1209a.webp
    23.8 KB · Views: 143
  • IMG_1208a.webp
    28.5 KB · Views: 361

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
May 26, 2006
#2
  • May 26, 2006
  • #2
you bastard guy I was expecting burnout pics! Looks like a pretty nice install tho
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
May 26, 2006
#3
  • May 26, 2006
  • #3
Ive always wondered, How does it know when to disengage the front brakes? How does it know you are moving?
 

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
May 26, 2006
#4
  • May 26, 2006
  • #4
isnt it a button?
 

Dan95-5.0

Active Member
Jun 14, 2003
1,110
0
36
Manitoba, Canada
May 26, 2006
#5
  • May 26, 2006
  • #5
step on brake pedal.

push button.

release brake.

front brakes stay on (locked) rear brakes are off

give gas.

make smoke

push button to release front brakes


Ernie, you should make a install guide outlining what you needed and how you installed that kit. i'm interested in picking one up
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
May 26, 2006
#6
  • May 26, 2006
  • #6
Dan95-5.0 said:
step on brake pedal.

push button.

release brake.

front brakes stay on (locked) rear brakes are off

give gas.

make smoke

push button to release front brakes


Ernie, you should make a install guide outlining what you needed and how you installed that kit. i'm interested in picking one up
Click to expand...
I though the point of a line lock was to keep the car from moving when you are on the line? That seems ind of odd that you would have to actually push the button while you are starting a run.
 

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
May 26, 2006
#7
  • May 26, 2006
  • #7
its to cook the tires before you launch to heat them up...is it not?
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
May 26, 2006
#8
  • May 26, 2006
  • #8
did you get the instalation kit or did you get the lines and fittings from the parts store? looks good. i will be ordering one soon.
 

Slow5.0

Active Member
Feb 13, 2003
2,554
0
46
Portland, OR
May 26, 2006
#9
  • May 26, 2006
  • #9
Like i said i had to make 3 trips in AutoZone because non of those breake lines didn't fit

I came up with 2 3/16 12" double flare breake lines
1 3/16 inverted flare breake line (shortest one you can get because you gonna use two fittings from that inverted flare breake line)
One hex plug (1/8 NPT) if you gonna use LineLock that have 1 IN and 2 or 3 OUT ,if is only 1 OUT than don't need this plug
21/8 to 3/8-24 adapters
Flare tool (can be rented in AutoZone)

Because Line lock uses inverted flareand Ford uses double flare i had to cut off 2 double flare lines and use 2 inverted fittings from that shortest inverted line and then use flare tool and make it inverted so that end will fit on Line Lock side
Sounds crazy but thats only was i can do (i tryed find parts in AUtoZone and AdvanceAutoParts but non of them have breake line that is double on one and inverted on another side or adapter from double to inverted flare

I bought "Kill switch" just for safery reason ,and one LED light
Wiring go like this
Ignition wire - Kill switch - LineLock push button - LED light - LineLock (and i grounded LineLock to battery)

I spend about $17 on those parts plus cost of LineLock (i had some breake fluid from before so you may need little bit to belld brakes ,its good to blead all 4 calipers like i did
So for 90 some bucks you can have this in your car
I hope you guys understand my writing (probably not)

Let me know if you have some more questions
 

pleasehelp

New Member
Mar 11, 2003
686
0
0
Poplar Grove, Il
May 27, 2006
#10
  • May 27, 2006
  • #10
Damn. Looks like you had a productive week! Well done!!
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
May 27, 2006
#11
  • May 27, 2006
  • #11
Slow5.0 said:
I hope you guys understandmy writing (probably not)

Let me know if you have some more questions
Click to expand...
I dont understand but its a long night if u no what I mean......
 

Slow5.0

Active Member
Feb 13, 2003
2,554
0
46
Portland, OR
May 27, 2006
#12
  • May 27, 2006
  • #12
pleasehelp said:
Damn. Looks like you had a productive week! Well done!!
Click to expand...

Yeah , still have tons ***** to do
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Jun 16, 2006
#13
  • Jun 16, 2006
  • #13
What thread and seal type is our master cylinder? I bought the line lock and hope to get all of the lines and fittings needed this weekend.
 

1TallMF

New Member
Apr 17, 2006
955
1
0
Montreal
Jun 16, 2006
#14
  • Jun 16, 2006
  • #14
The Green GT said:
I though the point of a line lock was to keep the car from moving when you are on the line? That seems ind of odd that you would have to actually push the button while you are starting a run.
Click to expand...


I think you're thinking of a trans break for automatics, which engages 1st and reverse gears simultaneously so the car doesn't move after staging while you are applying part throttle before starting the run.
 
You must log in or register to reply here.

Similar threads

On3 Performance Install Tips
  • flstang65
  • Dec 15, 2019
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
12K
1996 - 2004 SN95 Mustang -General/Talk- Mar 17, 2023
atomicfox236
A
Engine Boosted 347 / Crankcase pressure - Evacuation Project
  • 93silverlx50
  • Jun 16, 2018
  • Fox 5.0 Mustang Tech
Replies
0
Views
2K
Fox 5.0 Mustang Tech Jun 16, 2018
93silverlx50
So,...You're gonna take your car to a shop to have it worked on...lets talk.
  • CarMichael Angelo
  • Mar 3, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 3, 2019
Rdub6
Old H/c/i Installation Explanation And Pics
  • FastDriver
  • Jan 26, 2018
  • Fox 5.0 Mustang Tech
Replies
5
Views
2K
Fox 5.0 Mustang Tech Jan 27, 2018
FastDriver
V3 Installed!!! Lots Of Pics
  • Jason 302
  • Apr 1, 2016
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
56
Views
7K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 9, 2016
tannerc91gt
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?