• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Little computer help

  • Thread starter Thread starter 89LXNotchPI
  • Start date Start date Aug 30, 2005
8

89LXNotchPI

New Member
May 28, 2005
21
0
0
Washington
Aug 30, 2005
#1
  • Aug 30, 2005
  • #1
My car has been backfiring through mnifold ever since I reset my comp about a week ago. However, it only backfires when in gear(AOD) not in park or nuetral. I'm thinking it has to be coomputer related, getting way too much fuel at idle, the idle is really rough, timing is fine, TPS is fine. Backfiring stops after the car revs over 2,000 rpm. Any help or ideas would be appreciated. Also, what is the ebst way to clean the 10-pin connectors? Thanks for any help.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 30, 2005
#2
  • Aug 30, 2005
  • #2
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.
 

Red88 RICK

Member
Sep 2, 2006
101
0
17
Connecticut
Apr 21, 2007
#3
  • Apr 21, 2007
  • #3
i dont get it the site dosnt tell me how to pull codes on my musatng it says liek diesil and stuff and i dont know where the DLC is anyway i gotta stock rebuilt 302 and i wanna get soem codes out because it has been running odd so if anyone can explane or have a diff site to go to it would b a great help
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 21, 2007
#4
  • Apr 21, 2007
  • #4
Red88 RICK said:
i dont get it the site dosnt tell me how to pull codes on my musatng it says liek diesil and stuff and i dont know where the DLC is anyway i gotta stock rebuilt 302 and i wanna get soem codes out because it has been running odd so if anyone can explane or have a diff site to go to it would b a great help
Click to expand...

Dump the codes and see what the computer says is wrong…Codes may be present in the computer even if the Check Engine light isn’t on.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html







IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Wal-Mart.

Or for a nicer scanner see http://www.midwayautosupply.com/pc-7208-90-equus-digital-ford-code-reader-3145.aspx – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.
 
You must log in or register to reply here.

Similar threads

T
Engine Need help figuring out misfire and backfire
  • trystancounts
  • Sep 25, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
442
Fox 5.0 Mustang Tech Sep 26, 2025
Noobz347
J
Lack of power on acceleration
  • jameshernandez
  • Aug 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
199
1996 - 2004 SN95 Mustang -General/Talk- Sep 6, 2026
jameshernandez
J
J
MEED HELP!! 86 mustang
  • Jacob0121
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
492
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
CAMTWO1070
T
Fuel P0193 on a 2003 3.8 v6
  • Treemaster5000
  • Aug 18, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
126
SN95 V6 Mustang Tech Aug 18, 2026
Treemaster5000
T
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
916
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?