A few months ago i got a chip burnt from JMS Chips (the superchips 4 program eliminator chip). The first time i had to send it back because the car was acting completely out of whack. The new one they sent me has been working fine and my car runs great, with one exception. Every time i come to a stop my car holds the idle up at 1500rpm till i come to a complete stop, then idles back down to ~800rpm. Ive tried closing off the throttle blade more and reseting the computer, and if i close it too much, the problem goes away but as i creep to a stop the rpm stays around 1000, then at the stop jumps up a tiny bit, and then stalls, or comes very close to stalling but then recovers. If i open it up a little more (reset the computer of course) it seems to want to just hang at 1500 till a complete stop like the first time...
Anyone had this before... is my idle air getting old? i cant find any vaccum leaks...
Thing is if i were to take the chip out it doesn't do it anymore....
Should i call them again? I really want to steer clear of calling because if i have to send the chip back it takes them like a month before i get it back...
thanks,
david
Anyone had this before... is my idle air getting old? i cant find any vaccum leaks...
Thing is if i were to take the chip out it doesn't do it anymore....
Should i call them again? I really want to steer clear of calling because if i have to send the chip back it takes them like a month before i get it back...
thanks,
david
