Longtubes??

MustangOwner · Nov 11, 2007

Paisu said:
Nice coating you have there . Sorry, thanks for the picture.
I do have problems even with shorties, and bbk x-pipe, not to hit on the wall of my garage with a minor lowering. Now i can see that L/T wont be worth the hp for me with that ground clearance.

Oh no no, this is not my car! I'd rip those suns of bi tches off as fast as i could if it were mine! Thats Bassani for yah though! Over priced Shi t! $899.99 for those, what a bunch of chit

bloopbloob · Nov 11, 2007

those hang extremely low! my bbks don't hang lower than anything else under the car. don't let that picture make you think thats how all lts are going to sit!!

stykthyn · Nov 12, 2007

bloopbloob said:
those hang extremely low! my bbks don't hang lower than anything else under the car. don't let that picture make you think thats how all lts are going to sit!!

+1 on that one. dont let one pic of a piss poor install turn you away. out of all the cars and trucks I have owned I have never been disappointed with the results from adding LT's. they have been around forever b/c they work. period.
spend the time and money to get them installed correctly the first time and crap like whats in that pic wont be a problem for you.

1991vert · Nov 12, 2007

cevtv said:
Unless you have a visual check......

usually they jack it up and check ball joints. dunno what else they pay attention to while they're down there

zx9rrick · Nov 12, 2007

Pic with bbk longtubes

stykthyn · Nov 12, 2007

that is one clean suspension! does it see a lot of street miles?

Thomas302 · Nov 12, 2007

How do the bbk long tubes headers fit with a lakewood safety bell?

FoxRod87 · Nov 13, 2007

had bbks on an 87 and it was pretty simple. Just had to loosen the passenger side motor mount and jack up that side to get it in. and the driver side went right in with no problems.

cevtv · Nov 13, 2007

1991vert said:
usually they jack it up and check ball joints. dunno what else they pay attention to while they're down there

Yeah - that's part of the safety check, not the emissions visual.

MrXCESSIVESPEED · Nov 13, 2007

Thomas302 said:
How do the bbk long tubes headers fit with a lakewood safety bell?

usually require you to clearance the scattershield flange slightly with nearly any long tube header. My Kooks didnt need any clearancing, but they are the only ones Ive used that were that way.

TrickFlowd · Nov 15, 2007

The only thing that sucks about LT's are the o2 sensor extentions, because there is no where to tie them up. But I heard that Advance Auto sells o2 sensors with longer wiring?

cenok is family · Nov 15, 2007

TrickFlow'd said:
The only thing that sucks about LT's are the o2 sensor extentions, because there is no where to tie them up. But I heard that Advance Auto sells o2 sensors with longer wiring?

yeah i know! my o2's hang down and it pisses me off. if you're within a 30' radius of my car you can't see them because my car is low, but anywhere outside of that, it looks like crap with chit hanging down under my car. they're definitely worth it though. just not the crappy hedman's i have...

Grn92LX · Nov 15, 2007

Thomas302 said:
How do the bbk long tubes headers fit with a lakewood safety bell?

Wont fit with a lakewood, you'll need to cut the bell. They will fit with a mcleod bell.

MrXCESSIVESPEED · Nov 15, 2007

TrickFlow'd said:
The only thing that sucks about LT's are the o2 sensor extentions, because there is no where to tie them up. But I heard that Advance Auto sells o2 sensors with longer wiring?

Advance and auto zone both sell 02s with a longer harness. Really only the LH side needs it. I dont use harness extensions at all and I have plenty of length in the stock harness....and my long tubes may be a little longer than BBKs

View attachment 347871

cenok is family · Nov 15, 2007

MrXCESSIVESPEED said:
Advance and auto zone both sell 02s with a longer harness. Really only the LH side needs it. I dont use harness extensions at all and I have plenty of length in the stock harness....and my long tubes may be a little longer than BBKs

View attachment 347869

yeah i didn't have to use extensions either. if anything, i wish my o2 harness' were shorter to take up some of the slack.

TrickFlowd · Nov 15, 2007

MrXCESSIVESPEED said:
Advance and auto zone both sell 02s with a longer harness. Really only the LH side needs it. I dont use harness extensions at all and I have plenty of length in the stock harness....and my long tubes may be a little longer than BBKs

View attachment 347867

Man your car looks good!!!! What suspension? I love the way it sits. I want DETAILS!!! haha.

I actually bought my car and it had extentions, I guess I know what I'm going to do this weekend. Take those faulkers off!!!

MrXCESSIVESPEED · Nov 15, 2007

TrickFlow'd said:
Man your car looks good!!!! What suspension? I love the way it sits. I want DETAILS!!! haha.

I actually bought my car and it had extentions, I guess I know what I'm going to do this weekend. Take those faulkers off!!!

Thanks man, I appreciate it. I'lll shoot ya a PM so I dont hijack the thread.

Longtubes??

MustangOwner

Banned

bloopbloob

Member

stykthyn

I want to measure mine. It doesn't look that tall.

1991vert

zx9rrick

New Member

Attachments

stykthyn

I want to measure mine. It doesn't look that tall.

Thomas302

Member

FoxRod87

Active Member

cevtv

MrXCESSIVESPEED

Member

TrickFlowd

Member

cenok is family

Grn92LX

Fidanza Man!

MrXCESSIVESPEED

Member

cenok is family

TrickFlowd

Member

MrXCESSIVESPEED

Member

Similar threads

Longtubes??

Banned

Member

I want to measure mine. It doesn't look that tall.

New Member

Attachments

I want to measure mine. It doesn't look that tall.

Member

Active Member

Member

Member

Fidanza Man!

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency