• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

looking for a cheap mod that increases power for my next track visit

  • Thread starter Thread starter DerekStangGT
  • Start date Start date Nov 25, 2004
  • 1
  • 2
Next
1 of 2 Next Last
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Nov 25, 2004
#1
  • Nov 25, 2004
  • #1
l need a good mod for my next visit to the track on Dec 17. im looking for another .1 in the 1/4. is there anything for under $200??
thanks
 
D

damien2003gt

New Member
Jun 20, 2003
181
0
0
Nov 25, 2004
#2
  • Nov 25, 2004
  • #2
Free: Practice. It's the best Mod
Free: Dump the stereo and alarm..... Very heavey
Cheap: Get some used ET street. They will take a good half second off your ET.
 

SpitfireMk24

New Member
Jul 2, 2003
140
0
0
Livermore, CA
Nov 25, 2004
#3
  • Nov 25, 2004
  • #3
damien, those are really good ideas!

how about intake? thats about 150 bucks, and its super easy to install, right? and I always wanted to get intake and that tape from the summit catalog that deflects radiant heat and tape up the intake track . . . just for good measure . . .

I am not speaking from experience here, so please dont flame me if Im wrong or thats a waste of money
 

SpitfireMk24

New Member
Jul 2, 2003
140
0
0
Livermore, CA
Nov 25, 2004
#4
  • Nov 25, 2004
  • #4
FRPP throttle body?
 

crazynorwegian

20+ Year Stangneter
Nov 6, 2003
267
0
16
azusa, ca
Nov 25, 2004
#5
  • Nov 25, 2004
  • #5
pulleys should take about .1 off your time.
 

nickthegenius

Active Member
Dec 23, 2002
1,631
1
38
Elwood, IN
Nov 25, 2004
#6
  • Nov 25, 2004
  • #6
DerekStangGT said:
l need a good mod for my next visit to the track on Dec 17. im looking for another .1 in the 1/4. is there anything for under $200??
thanks
Click to expand...

I would go with pulleys and then when you have a little more money you can add a timing adjuster. Skip the CAI until you are out of bolt-ons because you won't see crap out of it other than better looks.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Nov 25, 2004
#7
  • Nov 25, 2004
  • #7
free-less than a 1/4 tank of gas and tak eout the system.
-i also say go with the Steeda U/D Pullies and then when u get a chance again, pick up the Steeda timing adjuster
 

Slider

Founding Member
May 19, 2000
729
1
18
Gainesville, FL
Nov 25, 2004
#8
  • Nov 25, 2004
  • #8
Pulleys or Timing Adjuster: they are about $150 each, and good for about 5-10 hp.
 

Green4.6GT

Size Matters
Founding Member
Dec 31, 2001
2,910
0
0
Regina, Sask, Canada
Nov 25, 2004
#9
  • Nov 25, 2004
  • #9
pull the upper and port it, free and should get you 8-10 ponies
 
D

Darkhorse845

Banned
Nov 17, 2004
101
0
0
Las Vegas,Nevada
Nov 25, 2004
#10
  • Nov 25, 2004
  • #10
I would do pulleys.
 
X

XStanger

Founding Member
Sep 1, 2002
383
0
16
Nov 25, 2004
#11
  • Nov 25, 2004
  • #11
agree with others, dump the stereo and run on an empty tank. Every 100lbs you drop is almost equal to .1 in the 1/4. You could do this and buy some used slicks and run .1-.5 better.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Nov 25, 2004
#12
  • Nov 25, 2004
  • #12
ok, maybe i should clarify: my last track visit i DID take out my stereo equipment, spare, jack, and pass seat. and i cant do UD pullies b/c i have a full audio system so it would sap too much power from my alt. actually a TA would work. anyone have recommendations for a cheap place to get a TA? also, w/o using a dyno to tune, how would i know how many degrees to advance?
EDIT: and i dont want slicks or DRs b/c i dont have the $$ to replace my axles
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Nov 25, 2004
#13
  • Nov 25, 2004
  • #13
Green4.6GT said:
pull the upper and port it, free and should get you 8-10 ponies
Click to expand...
please explain this porting of which you speak. do i just use a dremmel? is it safe?
damien2003gt said:
Free: Dump the stereo and alarm..... Very heavey
Click to expand...
and how exactly should i remove the alarm? pull out every wire in the car and yank out the horn under the hood? is there really anything to remove?
 
S

spikeGT_99

New Member
May 3, 2004
184
0
0
Jackson, Ms
Nov 25, 2004
#14
  • Nov 25, 2004
  • #14
if u want to port the plenum all u need is a dremmel, and i believe its pretty safe but,i havent seen a really good step by step for the porting process so i havent had the guts to do it myself. u can also port the tb at the same time, the ford tb is actually 70mm on the intake side, u port the exhaust side from 65 to 70 and put a new butterfly in, u can get a k&n filter, trim the heat shield, and buy a roush/c&l inlet tube for 50+ bucks and along with porting the plenum u got a whole new intake, but im just too lazy to do it
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Nov 25, 2004
#15
  • Nov 25, 2004
  • #15
spikeGT_99 said:
if u want to port the plenum all u need is a dremmel, and i believe its pretty safe but,i havent seen a really good step by step for the porting process so i havent had the guts to do it myself. u can also port the tb at the same time, the ford tb is actually 70mm on the intake side, u port the exhaust side from 65 to 70 and put a new butterfly in, u can get a k&n filter, trim the heat shield, and buy a roush/c&l inlet tube for 50+ bucks and along with porting the plenum u got a whole new intake, but im just too lazy to do it
Click to expand...
Don't bother with the port and polish and FRPP TB.
If you really want to do the intake, go with C&L or Accufab, and an Accufab TB. But you best option here is pulleys. Ditch the stereo.
Or just save your money.
 

Green4.6GT

Size Matters
Founding Member
Dec 31, 2001
2,910
0
0
Regina, Sask, Canada
Nov 25, 2004
#16
  • Nov 25, 2004
  • #16
yea just pop it off and look at it, it is REALLY rough and poorly cast inside, you can open it up quite a bit with a dremel... also if youre looking at getting a timing adjuster, why not jsut save up for a few more wks.. and get a chip, or tune.. that will not only bump the timing, but adjust fuel aswell?...


DONT PULL THE ALARM!!! for the maybe 5-8 lbs it is, its not worth the hassle, not to mention it keeps your stang safe at night while you sleep lol...
 

myponyrocks

I have more billet on the Stang than most women ha
Apr 18, 2004
1,219
0
37
Nov 25, 2004
#17
  • Nov 25, 2004
  • #17
I'm runnin a 1k watt amp with a 1 farahd cap, pulleys have not stressed the battery at all.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Nov 25, 2004
#18
  • Nov 25, 2004
  • #18
myponyrocks said:
I'm runnin a 1k watt amp with a 1 farahd cap, pulleys have not stressed the battery at all.
Click to expand...
really? thats good to know. i have only a little more (~1800 watts and a 1.2 farad cap), but i have 2 amps. would mine make that much of a difference?
 
F

ForPointSex

Founding Member
Mar 19, 2002
395
0
16
Mercer, NJ
Nov 25, 2004
#19
  • Nov 25, 2004
  • #19
Pull out the passenger headlight and remove the silencer. Should give you the .1 your looking for.
 

crew_dawg16

New Member
Apr 25, 2004
445
0
0
DeKalb, IL
Nov 25, 2004
#20
  • Nov 25, 2004
  • #20
you should be safe with the pulleys.

Take your dremel and cut the stock airbox so that all that's left it the part that holds the filter with the clamp and the bracket that holds it to the fender. You will have an open filter and with a removed passenger headlight, will give you a nice cold air charge.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
910
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
T
Fuel Looking for a little guidance
  • Tufgriz
  • Sep 11, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
359
Fox 5.0 Mustang Tech Sep 12, 2025
Noobz347
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
165
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
78
The Welcome Wagon Jul 3, 2026
5150K
5
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?