Looking for a hardware source

[limp]

Does anybody here have a decent source or recommendation to find these types of fasteners??

 

[WillieSmokeUm]

Late Model Restoration. Hardware section.

 

[FortySix&2]

Those are quite common. Your local parts store probably has them or https://www.mcmaster.com/frame-rail-clip-nut/

 

[limp]

Late Model Restoration. Hardware section.

Thanks, they had the newer ones with a different thread ;pitch, according to their website.....

 

[limp]

Those are quite common. Your local parts store probably has them or https://www.mcmaster.com/frame-rail-clip-nut/

I will check it out...... I have an email to my local fastener supplier too.....
Thanks

 

[General karthief]

If you need a lot of them hit up a manufacturer, I bought a box of like 100 automotive wire loom clips, the little white ones, for pennies compared to the half dozen you get from LMR or parts store.

 

[WillieSmokeUm]

I forgot Mcmaster.com.

 

[limp]

If you need a lot of them hit up a manufacturer, I bought a box of like 100 automotive wire loom clips, the little white ones, for pennies compared to the half dozen you get from LMR or parts store.

Appreciate it General...... I only need 2 of them.....
Who was your source for the wire loom clips??

 

[Saleen0679]

ClipsAndFasteners.com
autofastenersandclips.com

 

[General karthief]

ClipsAndFasteners.com
autofastenersandclips.com

one of these two I'm sure.
if you tell me where you are using them or a pic of one I gots some in my parts/pieces box

 

[limp]

one of these two I'm sure.
if you tell me where you are using them or a pic of one I gots some in my parts/pieces box

Thanks for the offer... I sent you a PM.....

 

[Noobz347]

Amazon.com : nut clip hardware