• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

looking for a new cam

  • Thread starter Thread starter wildstang90
  • Start date Start date May 31, 2008

wildstang90

New Member
Nov 24, 2004
87
0
0
Bristol, TN
May 31, 2008
#1
  • May 31, 2008
  • #1
Been looking at the B303 cam. looks like with this cam I dont have to worry about the piston to valve clearance with still good low end torque and peek power some where around 4500. So far not a lot of mods on the car as of yet but will be putting a new set of heads on in the nere future. One more thing is there anyhting I should change out at the same time as the cam to save time or just replace somehting thats worn. The car have 170k stuill runs strong so any idea and all the help I can get is welcome.
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
May 31, 2008
#2
  • May 31, 2008
  • #2
Until you're ready to do the heads, cam and intake I wouldn't bother. The B cam may be advertised as having good low end torque but I wonder what they compared it to. Mine has ZERO torque below 1500 RPM. The stock cam is a much better match for the stock intake and heads.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
May 31, 2008
#3
  • May 31, 2008
  • #3
I 100% agree with maryland. That cam is no good. i ran one for a year or so and i hated it. it felt like i lost power. and im sure i did becasue the car actually did run slower.
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
May 31, 2008
#4
  • May 31, 2008
  • #4
BK_CAULEY said:
I 100% agree with maryland. That cam is no good.
Click to expand...

Just a little clarification. The cam isn't well suited for stock heads and intake. I do run the cam and I'm 100% satisfied with it's performance. I knew it was low end challenged before I put it in so there were no surprises. There may be better cams out there for my application that meet all of my criteria but someone would have to prove it to me before I'd switch.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
May 31, 2008
#5
  • May 31, 2008
  • #5
Maryland Stang said:
Just a little clarification. The cam isn't well suited for stock heads and intake. I do run the cam and I'm 100% satisfied with it's performance. I knew it was low end challenged before I put it in so there were no surprises. There may be better cams out there for my application that meet all of my criteria but someone would have to prove it to me before I'd switch.
Click to expand...

i had gt40 p's and an explorer intake.
 

wildstang90

New Member
Nov 24, 2004
87
0
0
Bristol, TN
May 31, 2008
#6
  • May 31, 2008
  • #6
Thanks for the input .. Cam will just go on the waiting list. I should had added to that this is not a daily driver its just a toy that will see alot more track time than road.
 
T

*TURBO GT*

Banned
May 26, 2008
13
0
0
ILLINOIS
May 31, 2008
#7
  • May 31, 2008
  • #7
wildstang90 said:
Thanks for the input .. Cam will just go on the waiting list. I should had added to that this is not a daily driver its just a toy that will see alot more track time than road.
Click to expand...

If you plan on track time get serious with your setup from the start.


They say go big or go home.

306

f-cam

afr 165's

sheetmetal intake

full mac exhaust

75 tb

75 ma

30lb inj

3.73 ,5spd . 4.10 auto gears

and some n2o

thats a good setup imo
 

wildstang90

New Member
Nov 24, 2004
87
0
0
Bristol, TN
Jun 1, 2008
#8
  • Jun 1, 2008
  • #8
Thats where I am headed I have 373s in now everything on the inside has been removed other then the driver seat. Started the removal of the smog crap and the AC unit. I hav been looking at the Jegs intake dont rember the name but its just a box no runners. I have been looking at head and a cam but right now I dont have the cash its 1 thing at a time.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Jun 1, 2008
#9
  • Jun 1, 2008
  • #9
replace the timing chain when you decided to do this. You have to be right there anyway so put a new one in just in case your old one is stretched. Also a good time to do a basic tune up on the car if it needs it.
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
710
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
491
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?