Brakes Looking for the correct front rotor wheel bearing seal..86 Mustang

Canyonred86 · Jun 8, 2024

I having a problem finding the correct size wheel bearing seal for my power stop drilled brake discs ..I have sourced two from auto zone (durolast) and Napa (SKF) neither seems to fit and both are are off in size...anybody has had this problem sourcing the correct size even when the part is listed as the correct seal?

Noobz347 · Jun 9, 2024

That first image looks to me like the seal just needs to be knocked into place.

Do you have a socket that size or some other circular piece of something? Hell, I've use a roll of duct tape to smack on in a pinch.

AeroCoupe · Jun 9, 2024

Usually you can borrow seal drivers at the auto parts store if you don’t have anything like what Noobz mentioned.

Also, since you did not preface what the caliper reading is showing is that the ID of the pocket where the seal installs on the rotor?

General karthief · Jun 9, 2024

Whats the part number for the rotors?

Canyonred86 · Jun 9, 2024

General karthief said:
Whats the part number for the rotors?

Powerstop evolution #AR8111XPR

General karthief · Jun 9, 2024

That's stock spec replacement part, get a flat piece of wood or a socket that fits the shoulder and tap it in,

Canyonred86 · Jun 9, 2024

Using both methods..the seal is little larger on the smallest end ..I should be able to press the small end by hand and tap in

Mustang5L5 · Jun 11, 2024

Those part numbers do show to be the correct seal for a 1986 rotor.

Canyonred86 · Jun 11, 2024

Mustang5L5 said:
Those part numbers do show to be the correct seal for a 1986 rotor.

Yes the part numbers are correct for 84 85 and 86 svo 's and 87 to 93 50.L mustangs. All 79 to 86 5.0L and 4 cyl up to 93 cars with the ten inch discs call for for a different size seal about 2.50 inch I.D ....the correct size was found by getting a seal for a 79 or 84 ( SKF # 19221) thru another trip to Napa ....autozone online lists it's durolast for all models of foxbodies ....If you go to a parts store and ask seal for a 82 to 86 gt you better off showing them the old seal or measure the the back of the hub to get the right part.... thanks for the help anyways ...I hope that will help those who can get confused by this...like I did

Brakes Looking for the correct front rotor wheel bearing seal..86 Mustang

Canyonred86

Member

Attachments

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

AeroCoupe

lube between the nut and the face. I know my lubes

General karthief

wonder how much it would cost to ship you a pair

Canyonred86

Member

General karthief

wonder how much it would cost to ship you a pair

Canyonred86

Member

Attachments

Mustang5L5

That is…until I whipped out my Bissell

Canyonred86

Member

Attachments

Similar threads

Brakes Looking for the correct front rotor wheel bearing seal..86 Mustang

Member

Attachments

Stangnet Facilities Maint Tech... Er... Janitor

lube between the nut and the face. I know my lubes

wonder how much it would cost to ship you a pair

Member

wonder how much it would cost to ship you a pair

Member

Attachments

That is…until I whipped out my Bissell

Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency