Currently have the following and have to gap my plugs at .032 (To prevent blow out):
Fully built (VT Engines) forged block with 16cc dished Diamond Pistons, Eagle Crank and Rod... HP Stage 2 cam... Vortech SQ Trim with 2.80 pulley (17lbs max boost). 60lb injectors, etc... Pushes close to 500HP and 466ft/lb torque to the wheels.
I'd like to get an engine management system now and upgrade the ignition. Any ideas on where to start? I've just jumped back into this build after a long layoff. So, my research has to start over...
Fully built (VT Engines) forged block with 16cc dished Diamond Pistons, Eagle Crank and Rod... HP Stage 2 cam... Vortech SQ Trim with 2.80 pulley (17lbs max boost). 60lb injectors, etc... Pushes close to 500HP and 466ft/lb torque to the wheels.
I'd like to get an engine management system now and upgrade the ignition. Any ideas on where to start? I've just jumped back into this build after a long layoff. So, my research has to start over...