• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Lost my spout connector! Help!!!!!

  • Thread starter Thread starter 95whitecobra
  • Start date Start date Jul 18, 2009

95whitecobra

New Member
Dec 1, 2008
5
0
0
Jul 18, 2009
#1
  • Jul 18, 2009
  • #1
Today i was messing with my timing and set my SPOUT CONNECTOR on the upper intake finished my timing shut the hood and took off now my SPOUT is no where to be found looked every place. Does anyone know where i can get one or order one or find a used one please! looked all over the internet and cant find one any help would rock!! Thanks .
 

Hef5.0weisen

20+ Year Stangneter
Mar 5, 2004
574
4
28
NorthWest Florida
Jul 18, 2009
#2
  • Jul 18, 2009
  • #2
junkyard...but in the mean time put a jumper wire in (jumper wire= take a 2 inch piece of wire, trim the insulation of each end, shove each end in the plug)

spout connector is a fancy jumper wire
 
G

grngt50

Member
Apr 26, 2004
250
0
16
Los Angeles
Jul 18, 2009
#3
  • Jul 18, 2009
  • #3
solid advice..............same thing happened to me and still have that damn jumper wire like 5 years later lol

-J
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,648
214
Acworth, GA
Jul 19, 2009
#4
  • Jul 19, 2009
  • #4
You can get a two wire connector from the parts store for about $3.00. They are usually red and white wires. You can use that to replace the spout, and just connect the red and white together on one side. Saves you a trip to the junkyard.

Kurt
 

Labora

Founding Member
Jun 11, 2000
1,855
26
69
Dallas, Texas
Jul 19, 2009
#5
  • Jul 19, 2009
  • #5
Paper clip with some electrical tape will get ya by also.

Used that for a hour or two until I started banging on the fender (where the spout fell into) and it actually fell out.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 19, 2009
#6
  • Jul 19, 2009
  • #6
If junkyard hunting, half the Fords from the 80's use them.
 

95whitecobra

New Member
Dec 1, 2008
5
0
0
Jul 19, 2009
#7
  • Jul 19, 2009
  • #7
Thanks for all the help guys, put a jumper wire in this morning worked great!!!
Thanks!!!!
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Jul 19, 2009
#8
  • Jul 19, 2009
  • #8
Spout connector always goes in the pocket when taken out
 

desertcox05

New Member
Oct 3, 2007
379
0
0
south atlanta
Jul 20, 2009
#9
  • Jul 20, 2009
  • #9
Venom351R said:
Spout connector always goes in the pocket when taken out
Click to expand...


solid advice.
But I have dropped the thing into the fender too during re-instal. I also got lucky it fell out with a little banging.
 
You must log in or register to reply here.

Similar threads

F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
596
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
329
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
72
SN95 4.6L Mustang Tech Oct 8, 2026
DadLife0724
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
403
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
371
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?