• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Low RPM bucking

  • Thread starter Thread starter 9 Deuce GT
  • Start date Start date Jun 26, 2005
9

9 Deuce GT

Member
Dec 10, 2003
550
1
16
Geneva, NY
Jun 26, 2005
#1
  • Jun 26, 2005
  • #1
What causes low speed bucking? Today I drove my car for the first long trip after the cam swap and a lot of fuel problems. It drives fine, and idles fine, but if I cruise any lower than at 2000 rpm's, it has a buck to it. Nothing super dramatic, but it's an annoyance. I remember driving the car when it was stock or close to it, and if you went too low on the tach in any certain gear and hit the gas, you just got a bog type effect until the rpm's came up. An example of what happened today, is if in thrid gear, and cruising to maintain a speed of 30 mph, the car would have a little bit of jerking to it. It does not do it when giving it a little gas, just when you back off the gas and try to cruise.
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
Jun 26, 2005
#2
  • Jun 26, 2005
  • #2
could be bad or old 02 sensors, could just be to rich on fuel. maybe the eec needs time to adjust to the new cam.
 

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Jun 26, 2005
#3
  • Jun 26, 2005
  • #3
Its definitely your cam. Depending on how aggressive the grind is on the cam will determine how driveability is at low rpms. It will probably get a little better after the computer has some time to adjust.
 
M

mackey

Active Member
Jan 25, 2003
1,284
1
38
Beverly, Massachusetts
Jun 26, 2005
#4
  • Jun 26, 2005
  • #4
It's not going to get any better. You are going to need to get it tuned. Who drives their cammed 5.0 below 2k rpms anyways? By the way I have the same cam as you.
 

Slow LX

Founding Member
Oct 11, 2001
345
0
16
Vernon, N.J.
Jun 26, 2005
#5
  • Jun 26, 2005
  • #5
What is your ignition timing at? I know when I set mine too high it will act like that... Try turning it down a little. This is kind of dumb, but your A/C is not kicking on and off?
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
Jun 26, 2005
#6
  • Jun 26, 2005
  • #6
I had tfs 1 cam in my vert with afr 165 heads but i had 24# injs It drove fine all the time. any rpm
 
9

9 Deuce GT

Member
Dec 10, 2003
550
1
16
Geneva, NY
Jun 26, 2005
#7
  • Jun 26, 2005
  • #7
Timing is at 16. I'll try turning it down.
 
You must log in or register to reply here.

Similar threads

Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
232
Other Auto Tech Jul 13, 2026
General karthief
S
idles perfect then jolts and cuts out when put into Reverse or Drive.
  • shanesstangs
  • Mar 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
224
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
General karthief
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
701
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
64
1965 - 1973 Classic Mustangs -General/Talk- Sunday at 9:21 AM
SchwarzStock
Engine Surging idle on start-up
  • keel
  • Aug 11, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
905
Fox 5.0 Mustang Tech Oct 31, 2025
keel
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?