• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Low voltage at fuel pump fuse

  • Thread starter Thread starter Edfol15
  • Start date Start date Jul 19, 2019
E

Edfol15

New Member
Jul 19, 2019
3
0
1
Maryland
Jul 19, 2019
#1
  • Jul 19, 2019
  • #1
So I just inherited my dads 1995 3.8L V6 mustang that’s been sitting for 5 years and I’m having a power supply issue to the fuel pump. I know the pump is good because I jumped the power supply to it and it turns on so I checked voltage at the fuse box and it’s only showing 6.5 volts and it should be 12volts I’m looking for help in chasing down this electrical issue that occurring somewhere between the battery and the fuse box and the battery is good it’s showing 11.79 volts there is also a spark issue so I’m wondering if there’s a component that might control these 2 issues I’m having new to ford motors usually work on Chevy and Nissan so any help would be greatly appreciated
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Jul 19, 2019
#2
  • Jul 19, 2019
  • #2
Most of the fuses in the battery junction box (BJB) are "always on". In this case when the fuse is removed there are two prongs. A supply side and a "load" side.

IF you are saying that there is excessive voltage drop on the supply side, THEN the problem HAS to be inside the BJB. A visual inspection is your friend.

Here's some more information on voltage drop testing.

Howto perform charging system voltage drop test

Howto perform charging system voltage drop test

To anyone else reading any of my posts I usually include the line: Today's cars simply will not run right without a strong battery and charging system! Cut corners here at your own risk I'm a big believer in starting with the basics. As such I...
www.stangnet.com
 
E

Edfol15

New Member
Jul 19, 2019
3
0
1
Maryland
Jul 30, 2019
#3
  • Jul 30, 2019
  • #3
wmburns said:
Most of the fuses in the battery junction box (BJB) are "always on". In this case when the fuse is removed there are two prongs. A supply side and a "load" side.

IF you are saying that there is excessive voltage drop on the supply side, THEN the problem HAS to be inside the BJB. A visual inspection is your friend.

Here's some more information on voltage drop testing.

Howto perform charging system voltage drop test

Howto perform charging system voltage drop test

To anyone else reading any of my posts I usually include the line: Today's cars simply will not run right without a strong battery and charging system! Cut corners here at your own risk I'm a big believer in starting with the basics. As such I...
www.stangnet.com
Click to expand...
Will a bad ccrm cause low voltage at the fuse pump
 
E

Edfol15

New Member
Jul 19, 2019
3
0
1
Maryland
Jul 30, 2019
#4
  • Jul 30, 2019
  • #4
wmburns said:
Most of the fuses in the battery junction box (BJB) are "always on". In this case when the fuse is removed there are two prongs. A supply side and a "load" side.

IF you are saying that there is excessive voltage drop on the supply side, THEN the problem HAS to be inside the BJB. A visual inspection is your friend.

Here's some more information on voltage drop testing.

Howto perform charging system voltage drop test

Howto perform charging system voltage drop test

To anyone else reading any of my posts I usually include the line: Today's cars simply will not run right without a strong battery and charging system! Cut corners here at your own risk I'm a big believer in starting with the basics. As such I...
www.stangnet.com
Click to expand...
And no spark at the plugs
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Jul 30, 2019
#5
  • Jul 30, 2019
  • #5
Edfol15 said:
Will a bad ccrm cause low voltage at the fuse pump
Click to expand...
well..........yes. But if the supply to the CCRM is low is it a surprise that the output is also low? After all the CCRM is basically just a relay.
Edfol15 said:
And no spark at the plugs
Click to expand...
Why go looking to replace parts before some of the most basic electrical items have been ruled in/out? Don't make this harder than it really needs to be. A few very short voltage tests will confirm one way or the other IF there's a problem in the BJB. It only takes a few seconds to measure the voltage at the BJB fuses. After all each of the fuses have a convenient metal probe right on the top put there for just such a purpose.

Or just "parts change" the CCRM. If it's where the problem is, then you made the right call (back slap).
 
You must log in or register to reply here.

Similar threads

F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
271
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
133
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
543
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
No power to the fuel pump
  • SNOTTY 5.0
  • Jun 1, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
283
2005 - 2014 S-197 Mustang -General/Talk- Oct 2, 2025
zurliene10
Z
0
'04 V6 running rich excessively on both banks
  • 04DSGVert
  • Oct 26, 2025
  • SN95 V6 Mustang Tech
Replies
2
Views
347
SN95 V6 Mustang Tech Oct 27, 2025
04DSGVert
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?