• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Lowering a gt

  • Thread starter Thread starter 1LowGT
  • Start date Start date Dec 25, 2005
  • 1
  • 2
Next
1 of 2 Next Last

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#1
  • Dec 25, 2005
  • #1
I just bought some eibach sportlines and i want to put them in this week but first i want to get some expert opinions on the matter i know i need caster/camber plates but will i need a bumpsteer kit and new struts? or is the stuff other than plates really necessary? car is a 98 gt
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 25, 2005
#2
  • Dec 25, 2005
  • #2
can you try and get your moeny back? sportlines are know to sag and THEY know it and won't do anything about it
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#3
  • Dec 25, 2005
  • #3
cant turn back now they are on the way,if they sag in the rear i will add bigger isolators,
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#4
  • Dec 25, 2005
  • #4
what do you think tom can stock struts work with sportys and would i need a bumpsteer kit?
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 25, 2005
#5
  • Dec 25, 2005
  • #5
i'm using the sportlines with the stock cobra shocks and struts, it's temp but there's been no change in pressure in the shocks/strutsand they still hold strong for 4 months, they should be good for about a year at most


[svt 96-98 shocks/struts have different vaving inside but it's not really a big improvement]

you can hold off but you should get a bumpsteer kit to correct the drop once you get the $ for them
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#6
  • Dec 25, 2005
  • #6
thats what im hoping is to hold over until i get more money then im doing some good struts and a bumpsteer,and then hopefully twin turbos
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 25, 2005
#7
  • Dec 25, 2005
  • #7
better build the block before the turbos
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#8
  • Dec 25, 2005
  • #8
most definately,i would have to,when i get something like that a little boost wont do it,i want alot,could of had 2 turbo setups for what christmas costed
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#9
  • Dec 25, 2005
  • #9
do you have any pictures of your car with the sportlines installed?
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 25, 2005
#10
  • Dec 25, 2005
  • #10
View attachment 493759

View attachment 493761
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#11
  • Dec 25, 2005
  • #11
that thing looks sweet!! now i cant wait,it dont look like it sags though
 
0

02GTRX

I told an admin to shut up...now I live with the S
20+ Year Stangneter
Sep 27, 2004
213
8
19
Dec 25, 2005
#12
  • Dec 25, 2005
  • #12
I have an 02 with sportlines. Have had them for about 6months now, stock struts and shocks went out at about 4months and started bouncing really bad in the back. I just received my new tokiko hp's yesterday. My caster camber plates will also be going in, I now have a bent strut and alignment is now shot. Offset rack and pinion bushings went in at time of spring installation I highly recommend you do the same. Here's a recent pic.
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#13
  • Dec 25, 2005
  • #13
what do you think bent the strut?
 
0

02GTRX

I told an admin to shut up...now I live with the S
20+ Year Stangneter
Sep 27, 2004
213
8
19
Dec 25, 2005
#14
  • Dec 25, 2005
  • #14
I have no clue. I got the car with 20k miles could have been previous owner or me for all I know. It was already bent at the time of the alignment though. Dont get worried though the springs were not the cause of the bending of the strut.
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 25, 2005
#15
  • Dec 25, 2005
  • #15
thats what i was afraid of good thing,did you have it lowered without cc plates? how close was alignment with no plates?
 
0

02GTRX

I told an admin to shut up...now I live with the S
20+ Year Stangneter
Sep 27, 2004
213
8
19
Dec 25, 2005
#16
  • Dec 25, 2005
  • #16
Yea I got it lowered without the cc plates because the alingment was as close as it was going to get due to the bent strut. In the 6 months Ive had it my front tires have feathered a bit, driver side on the inside of tire and passenger side on the outside of the tire. I have a friend that works at the ford dealership and he assures me its because of the bent strut. If you get them installed without the cc plates you'll start seeing wear in your tires in about a month
 

Seraphitia102

will post boobie pics for a supercharger
Oct 11, 2004
737
1
16
California
Dec 26, 2005
#17
  • Dec 26, 2005
  • #17
Best to get everything done at one time so you don't have to pay multiple charges for labor assuming you're getting it professionally installed.

For example, I went to Chicane Sport Tuning and they charge 3 hours of labor @ $70/hour for spring install. If I get the shocks and struts done at that same time with the springs, it's still 3 hours of labor, hence it's $210.

Let's say I got my H&R Super Sports and left my stock struts/shocks in. They'll probably last about 4 months with the extreme lowering H&R Super Sports give. Then I have to go back and get new shocks and struts installed for another 3 hours of labor @ $70/hour.

Better do it right the first time and be done with it. I got my springs, shocks/struts, caster/camber plates and alignment done all in the same day and have no trouble with my suspension/alignment at all.
 

BigHairyMonkey

Founding Member
Jun 18, 2003
411
1
16
Houston (Bellaire) TX
Dec 26, 2005
#18
  • Dec 26, 2005
  • #18
tomustang said:
can you try and get your moeny back? sportlines are know to sag and THEY know it and won't do anything about it
Click to expand...
So true
 

1LowGT

New Member
Sep 4, 2005
294
0
0
st louis mo.
Dec 26, 2005
#19
  • Dec 26, 2005
  • #19
i do all the work myself,i used to be a mechanic for years but now an electrician,cant get away from tinkering with cars though
 

RNstanger

New Member
May 30, 2004
29
0
0
Dec 26, 2005
#20
  • Dec 26, 2005
  • #20
I put in the Sportlines sometime in the beginning of the year. No CC plates, no bumpsteer kit, no sagging. I guess every mustang is different. Of course I do have the stock Tokiko's still in doing just fine. But if they ever do go bad I'll be happily installing some Bilsteins.http://forums.stangnet.com/attachment.php?attachmentid=35166&d=1117783972
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
2K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
Fox Alignment Suggestions
  • PonyGTrider
  • Jul 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
477
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2025
PonyGTrider
R
Suspension Lower control arms needed
  • racer_dave
  • Feb 9, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
3
Views
264
1974 - 1978 Mustang II Talk & Tech Feb 20, 2026
Noobz347
A
Procharger install/prep questions
  • ahratrew
  • Nov 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
377
SN95 4.6L Mustang Tech Nov 26, 2025
Noobz347
What's it Worth? 2000 GT
  • Mustang5L5
  • May 8, 2026
  • What is it Worth?!?!?
Replies
6
Views
320
What is it Worth?!?!? Jun 13, 2026
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?