• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

MAC Pro-Chamber and driveability

  • Thread starter Thread starter 02FloridaStang
  • Start date Start date Oct 21, 2007

02FloridaStang

New Member
Jun 12, 2006
2
0
1
Trinity, Florida
Oct 21, 2007
#1
  • Oct 21, 2007
  • #1
I have an '02 daily driven GT and I was considering a MAC Pro-Chamber, but I am concerned about how it will affect the driveability. When I first got the car I had the cats cut out and pipe welded in their place and I hated the way it made the car drive so I switched it out with a buddy of mine for the factory cat set-up, I was wondering how the Pro-Chamber would compare. Better, worse, or the same.
 

Seraphitia102

will post boobie pics for a supercharger
Oct 11, 2004
737
1
16
California
Oct 21, 2007
#2
  • Oct 21, 2007
  • #2
I never knew how exhaust affect driveability? i've went from the stock midpipe and catback to a Bassani X-pipe and Flowmaster catback and still don't see driveability changes.

However, my Eibach sway bars do hit my catback at times...

I would think things like lowering the car would affect driveability, but not so sure about exhaust?
 

SXYXC

New Member
Apr 22, 2007
77
1
0
Oct 21, 2007
#3
  • Oct 21, 2007
  • #3
the only way i can think that it would affect it is that the exhaust flows better so that extra 5 hp is a big problem for him.... I mean dang 5 hp is like a whole new word didn't you know that??

what changed about the drivability?? was it too loud?? what more details
 

02FloridaStang

New Member
Jun 12, 2006
2
0
1
Trinity, Florida
Oct 21, 2007
#4
  • Oct 21, 2007
  • #4
I did notice a little extra pep, and I loved the way it made the car sound. I have driven 5-speeds my whole life, but when I took the cats off it made the car almost impossible to drive. I am in a lot of stop and go traffic so for example to slow roll in first gear (have the car in first gear with your foot off the gas) the car would lunge uncontrolably. On approach to red lights to downshift into 2'nd and 1'st the car would basically put you through the windshield. It just made the car really hard to drive in a "city" situation, and like I said I have driven 5-speeds since I got behind the wheel of a car 13 years ago.
 

Blinkstang

Member
Apr 2, 2005
316
0
16
Chicago, IL
Oct 22, 2007
#5
  • Oct 22, 2007
  • #5
02FloridaStang said:
I did notice a little extra pep, and I loved the way it made the car sound. I have driven 5-speeds my whole life, but when I took the cats off it made the car almost impossible to drive. I am in a lot of stop and go traffic so for example to slow roll in first gear (have the car in first gear with your foot off the gas) the car would lunge uncontrolably. On approach to red lights to downshift into 2'nd and 1'st the car would basically put you through the windshield. It just made the car really hard to drive in a "city" situation, and like I said I have driven 5-speeds since I got behind the wheel of a car 13 years ago.
Click to expand...
I've got an O/R Prochamber with a MAC Catback and have had no problems in Chicago city traffic coasting to a stop in first. Didn't have any problems with my last 3-4 exhaust setups either - including LT's, O/R H, etc.... No lunge problems.
 

joshjwc9

Active Member
Jun 12, 2006
1,095
17
39
Palm Harbor, FL
Oct 22, 2007
#6
  • Oct 22, 2007
  • #6
Were the 02 Sensors installed backwards? Either that or you had an exhaust leak somewhere in there.
 

bullitt_2620

Member
Oct 11, 2005
91
0
6
San Diego, cali.
Oct 22, 2007
#7
  • Oct 22, 2007
  • #7
Sounds like an exhaust leak problem. I had to take my car with the pc on it to an exhaust shop to have them loosen the nuts because i couldnt physically do it because ford put them on way too tight, this was when i had to change to my stock h to pass smog. And driving it home, at idle, i had to give it gas to keep it from stalling.
On another note, the only problem ive had with my pc is that even with just bullitt suspension, i still sometimes scrape the pc on speed bumps and entrances and such to shopping centers sometimes. Other than that i really like mine, no drivability problems.
 

scupking

Active Member
Sep 18, 2005
1,186
1
36
Enfield, CT
Oct 22, 2007
#8
  • Oct 22, 2007
  • #8
02FloridaStang said:
I have an '02 daily driven GT and I was considering a MAC Pro-Chamber, but I am concerned about how it will affect the driveability. When I first got the car I had the cats cut out and pipe welded in their place and I hated the way it made the car drive so I switched it out with a buddy of mine for the factory cat set-up, I was wondering how the Pro-Chamber would compare. Better, worse, or the same.
Click to expand...

You will lose low end torque if you take your cats out or have an O/R pipe and this is probably what happened to you.
 

SXYXC

New Member
Apr 22, 2007
77
1
0
Oct 22, 2007
#9
  • Oct 22, 2007
  • #9
if you still have the problem with the loss of low end tq you can always do what i am going to do, buy some $40 high flow cats off ebay and install them yourself.. but mine is for emission purposes. and for me i'm lucky because i bought my o/r x pipe used for cheap. and then with the cats it will still be cheaper than buying a catted pipe.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Oct 22, 2007
#10
  • Oct 22, 2007
  • #10
Wont cause driveability issues from exhaust. Kind of wierd you experienced that, sounds more like a shady cam install... hah.
 
You must log in or register to reply here.

Similar threads

S
Upgrade Advice on an 89 GT Convertible NJ
  • SteakDad
  • Apr 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
913
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 18, 2025
limp
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
1
Views
641
Drivetrain Parts Dec 26, 2025
AeroCoupe
Progress Thread "Alter Ego" White 1993 LX 5.0 5spd
  • idareu
  • Sep 9, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2025
idareu
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?