• Mustang Forums
  • Mustang Sound & Shine All

Mach 460 questions (Replacing head unit and door speakers)

  • Thread starter Thread starter Back2Mustangs
  • Start date Start date Oct 15, 2007

Back2Mustangs

New Member
Sep 2, 2004
466
0
0
Oct 15, 2007
#1
  • Oct 15, 2007
  • #1
I want to replace the head unit in a 1996 GT. I also want to replace the factory 5x7 door speakers because they are both blown. I am car-audio-ignorant. I have never messed with any car audio so I have no idea about how this stuff wires up and what not to do.

I tried to search a little, but didn't find answers to my questions. First of all, the Mach 460 has two amps in the rear, and one under the dash...is that correct? If I replace the head unit do I have to bypass the front amp or can I/should I still use it?

Secondly, in shopping for replacement speakers I'm not having a whole lot of luck finding just a pair of component 5x7/6x8's. I'm thinking about buying something name brand off ebay just to replace the 5x7's in the doors. Can anybody give me some tips on what type of speaker I should replace the factory ones with? Should I just keep it simple and replace them with a set of factory speakers from another Mach 460 car?

I've been told that if I replace the head unit, I can use a two-way with the little tweeter attached to the center of the speaker... will it still function like it's supposed to? Will it sound like crap? Will the factory tweeters up by the mirrors still work? I am clueless about what to do and I don't care enough about this to spend a bunch of money paying someone to install alot of high-priced stereo gear. I've been driving without a radio for a year and I'm fine just listening to those Spintechs growl. Though, every once in a while I miss some tunes. Can anyone help educate a car-audio-idiot?
 
T

travelling frog

New Member
Feb 2, 2003
10
0
0
Oxford, MA
Oct 25, 2007
#2
  • Oct 25, 2007
  • #2
My install was totally over the top but it may give you some insight into various things.

http://travfrog.pertinent.net/mustang/audio_start.html

If you get 2-way with the tweeter in the center then it's going to sound a little odd since the sound stage will be located down at your feet - that's why they have thr tweeters by the mirror.

If you get a new head unit, you'll want to by-pass the old amps (remove them even) as most new head units have plenty of grunt.

The 460 isn't all that powerful really. Even the wires are pretty thin.
 

Back2Mustangs

New Member
Sep 2, 2004
466
0
0
Oct 30, 2007
#3
  • Oct 30, 2007
  • #3
travelling frog said:
My install was totally over the top but it may give you some insight into various things.

http://travfrog.pertinent.net/mustang/audio_start.html

If you get 2-way with the tweeter in the center then it's going to sound a little odd since the sound stage will be located down at your feet - that's why they have thr tweeters by the mirror.

If you get a new head unit, you'll want to by-pass the old amps (remove them even) as most new head units have plenty of grunt.

The 460 isn't all that powerful really. Even the wires are pretty thin.
Click to expand...

Hey thanks. I think that's everything I needed to know. I'll just keep it simple, get some factory replacement door speakers and a decent head unit.
 

eliteJAE

Member
May 29, 2007
0
1
16
Stanford University
Nov 4, 2007
#4
  • Nov 4, 2007
  • #4
you dont have get rid of the 460 amps, just get yourself a wiring adapter from scosche or METRA and mate the 460 amps to the new head unit. contrary to popular belief, you CAN use the stock amps with an aftermarket H/U. I got a new H/U and am using the amps and it sounds a hell of alot better than without the amps lol. if you need any more help, PM me and ill guide you through it, i was once in your shoes, going out and getting quoted from everyone and their mother to take the ENTIRE system out because it wouldn't "integrate" with a new H/U
 
J

jdoug

Member
Sep 2, 2005
14
2
13
SoFla
Nov 9, 2007
#5
  • Nov 9, 2007
  • #5
I too am running an aftermarket head unit with the stock amps. I have aftermarket 6.5" components up front and am now looking to install some Alpine 6x9s in the rear. Is it as simple as just replacing the speakers? Can I STILL use the stock amps?
 
You must log in or register to reply here.

Similar threads

Radio, Speaker Upgrades
  • TripleYellow
  • Apr 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
141
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 24, 2026
TripleYellow
S
Stereo snakes nest; what am I missing?
  • Scott_S
  • Aug 29, 2025
  • Mustang Sound & Shine All
Replies
3
Views
369
Mustang Sound & Shine All Sep 24, 2025
Scott_S
S
K
Need help with 99 cobra mach 460 audio
  • kevinatd18
  • Mar 16, 2024
  • Mustang Sound & Shine All
Replies
5
Views
2K
Mustang Sound & Shine All Mar 17, 2024
Noobz347
P
Interior and Upholstery Door Speakers- found suggestion to go component, not coaxial
  • pindude80
  • Apr 21, 2025
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Apr 28, 2025
Mindseye007
Run a 5 channel or use head unit and mono amp for sub?
  • 2000xp8
  • Sep 20, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 23, 2024
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Mustang Sound & Shine All
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?