• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Made a quick vid of my 408 coupe tonight

  • Thread starter Thread starter BlooDReigN
  • Start date Start date Aug 21, 2007

BlooDReigN

Member
Feb 22, 2004
283
1
16
Calgary, Alberta
Aug 21, 2007
#1
  • Aug 21, 2007
  • #1
Well, I got my coupe back together after removing the engine to replace a buggered oil pump. Some of you may have seen the video of me pulling it out.

Anyway, I decided to make a vid of it idling/revving in the garage. I plan on making a higher quality video tomorrow with a good camera and a little more "action". This is it for now though!

http://www.youtube.com/watch?v=t-zKNMYrD3c
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Aug 21, 2007
#2
  • Aug 21, 2007
  • #2
Don't sound like it tachs up very fast. What cam you got in it?
 

BlooDReigN

Member
Feb 22, 2004
283
1
16
Calgary, Alberta
Aug 21, 2007
#3
  • Aug 21, 2007
  • #3
Yeah...it usually does it faster, I just got it running and I think I may need to mess around with the TPS or something. It doesn't have the throttle response it did before. Should have it cleared up tomorrow I hope.

It's a custom cam btw. AFR 205 cylinder heads and 11:1 compression.

Oh, it's currently untuned (basicly just has what the guy who burned my chip guessed would be about right for my engine) and it's running 10 degrees base timing.
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Aug 22, 2007
#4
  • Aug 22, 2007
  • #4
BlooDReigN said:
Yeah...it usually does it faster, I just got it running and I think I may need to mess around with the TPS or something. It doesn't have the throttle response it did before. Should have it cleared up tomorrow I hope.

It's a custom cam btw. AFR 205 cylinder heads and 11:1 compression.

Oh, it's currently untuned (basicly just has what the guy who burned my chip guessed would be about right for my engine) and it's running 10 degrees base timing.
Click to expand...

Sounded like the timming maybe a little off to me when you reved it. Just thought i would say something. But other than that.
 

BlooDReigN

Member
Feb 22, 2004
283
1
16
Calgary, Alberta
Aug 22, 2007
#5
  • Aug 22, 2007
  • #5
Well I'll double check it tomorrow, but I had it set around 9 or 10 degrees. Might bump it up to 12 or 13.
 

ExplodingGopher

New Member
Jun 11, 2004
517
0
0
The mistake on the lake (Ohio)
Aug 23, 2007
#6
  • Aug 23, 2007
  • #6
tuning will make a world of difference, night/day type. My Z28 ran so much better after tuning from the cam swap that it was a HUGE difference.
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
526
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Fuel Fuel Pump Rewire, New Fuel Lines, and Installation of New Fuel Pump Hanger with AN6 Connections
  • AeroCoupe
  • Mar 12, 2023
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
13K
Fox 5.0 Mustang Tech Apr 16, 2023
AeroCoupe
R
1965 mustang body work, Complete Floor Pan Assembly install questions
  • runawayabc123
  • Jun 1, 2022
  • Classic Mustang Specific Tech
Replies
12
Views
7K
Classic Mustang Specific Tech Sep 14, 2025
GOvert
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?