mark VIII fan install

search for the member "baskin" on here and you'll find a post of two he made about how to order and how to get to his website.

Last I heard, the orders were pretty back ordered so he restricted the number of people who can place orders. You'll need to email him and then be prepared to wait a few weeks for the controller to arrive at you. It's worth the wait though, so don't get frustrated.

some things you can do while you wait:
You're going to need to figure out a way to attach the fan to the radiator. I made some brackets out of flat aluminum and bent/drilled them for this.

You'll also need to attach the stock overflow to the fan shroud or get a new overflow and attach it.

The 3G requires you to upgrade the wiring on your fox and possibly grind a little bit of the alternator bracket for fitting issues. Searching for "3G* alternator upgrade" or "3G* alternator wiring" should get you tons of hits in no time with details.

In the Technical Thread Index sticky there is a link to a 3G install by Roland69. There is also good discussion/debate in that thread on things like where to mount the fuse and extra grounds, which gauge wires to use, etc...

I use that thread to refrence my own 3G upgrade.