MASS AIR METER

You can run it just fine without a MAF but the car will run rich. The computer reads the fact that the MAF is not there and assumes a certain amount of air flow and runs a preset Safe mode to prevent the car from running lean and detonating.
 
c&l

no i have a 80mm c&l for 30s i have edelbrock heads,systemax intake, 75mm throtle body and spacer, and 1inch intake spacer,255lph holley pump,dss dish pistons,no ac,no ps,no smog pump,electric water pump drive,1 3/4 mac long tube headers, and a vortech s trim and fmu, s-trim not bolted on yet and a built c-4 with a 8inch ptc converter and pro stick shifter :)
 
check your tps voltage. hopefully jrichker will see this and throw out some numbers for the voltage. i believe it should be under 1 volt at WOT. dump some codes and we can help you out if you dont have a book
 
GREG91GT said:
no i have a 80mm c&l for 30s i have edelbrock heads,systemax intake, 75mm throtle body and spacer, and 1inch intake spacer,255lph holley pump,dss dish pistons,no ac,no ps,no smog pump,electric water pump drive,1 3/4 mac long tube headers, and a vortech s trim and fmu, s-trim not bolted on yet and a built c-4 with a 8inch ptc converter and pro stick shifter :)
c&l has been knw for there ****y mam's. i am gonna use a blow thru (not sure what brand) with my Blow Off Valve.