• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Mass Air Meters

  • Thread starter Thread starter PRO50SC
  • Start date Start date Feb 10, 2004
P

PRO50SC

New Member
Dec 28, 2003
1,012
1
0
Olney, Maryland
Feb 10, 2004
#1
  • Feb 10, 2004
  • #1
Who's gottem' and what brand? Any problems or work great? Let's hear about them. For what size injectors and what set up.
 

Black331Stang

Active Member
Apr 29, 2003
1,485
0
36
Long Island, NY
Feb 10, 2004
#2
  • Feb 10, 2004
  • #2
ProM and u can get them calibrated to any kind of iinjector that u need, unless i read what u were trying to say wrong.
 
9

92BlackGT

Member
Aug 4, 2003
182
7
17
Tinker AFB, OK
Feb 10, 2004
#3
  • Feb 10, 2004
  • #3
well everyone with a 5.0 '89 and after has them.
I have a 73mm C&L...i like it. it did make a idle surge for awhile but now it's all good ready to support my ported heads.
 

65ShelbyClone

Founding Member
Sep 9, 2000
4,675
38
119
Antelope Valley, SoCal
Feb 11, 2004
#4
  • Feb 11, 2004
  • #4
73mm C&L with 24lb tube. Supporting setup in my sig. I like it.
 
H

Highbredcloud

Active Member
Mar 4, 2003
1,075
1
36
Palos Hills, IL
Feb 11, 2004
#5
  • Feb 11, 2004
  • #5
Pro-M...Don't settle for anything less...Stay away from the bullet though...it just looks nice...
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Feb 11, 2004
#6
  • Feb 11, 2004
  • #6
I also have a C&L 73MM, it works good for me...
 

JadeFalcon

Founding Member
Mar 28, 2002
1,924
0
0
Arlington, TX
Feb 11, 2004
#7
  • Feb 11, 2004
  • #7
C&L's are total crap for anything but mild NA setups, from my experience, once you start flowing alot of air, that stock maf sensor cant keep up and it has mucho problems.

Pro-M is the choice you should go with, good quality.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Feb 11, 2004
#8
  • Feb 11, 2004
  • #8
Just put a 75mm pro-M bullet on,,,had some problems at first,all I had to do was to twist the unit 45 degrees,now it runs like a raped ape! Improved throttle response!!
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Feb 11, 2004
#9
  • Feb 11, 2004
  • #9
Stock with stock injectors, hasent been an issue yet but I think my Pro M 75 I will be getting will help the car some!
 
H

Highbredcloud

Active Member
Mar 4, 2003
1,075
1
36
Palos Hills, IL
Feb 11, 2004
#10
  • Feb 11, 2004
  • #10
25thmustang said:
Stock with stock injectors, hasent been an issue yet but I think my Pro M 75 I will be getting will help the car some!
Click to expand...


If you haven't gotten the 75mm bullet than I suggest you take a look at the pro-M 80mm or even the 77mm...you will be much more satisfied with either over the 75mm bullet...unless you want the looks of chrome under the hood...
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Feb 11, 2004
#11
  • Feb 11, 2004
  • #11
Highbredcloud said:
If you haven't gotten the 75mm bullet than I suggest you take a look at the pro-M 80mm or even the 77mm...you will be much more satisfied with either over the 75mm bullet...unless you want the looks of chrome under the hood...
Click to expand...
My 75mm bullet is flat black!
 
H

Highbredcloud

Active Member
Mar 4, 2003
1,075
1
36
Palos Hills, IL
Feb 11, 2004
#12
  • Feb 11, 2004
  • #12
willys1 said:
My 75mm bullet is flat black!
Click to expand...
they do make ones in chrome as well...your is probably the thick plastic one used on the Pro-M 80mm...if you ever going to upgrade the car h/c/i you may want to step up in the MAF department...
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
Feb 11, 2004
#13
  • Feb 11, 2004
  • #13
I've used the pro m 75 with 24's, pro m 80 with 30's, and now i've got a pro m 80mm univer for the 55's. Don't have the current set up and running but i've never had any problems pro m.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Feb 11, 2004
#14
  • Feb 11, 2004
  • #14
Highbredcloud said:
If you haven't gotten the 75mm bullet than I suggest you take a look at the pro-M 80mm or even the 77mm...you will be much more satisfied with either over the 75mm bullet...unless you want the looks of chrome under the hood...
Click to expand...

Well Im getting it for $100, and for both classes I plan to run in the future (NMRA Factory Stock/ and Real Street) I have to run 75mm or less. That means no C&L 76, no Pro M 77 or 80s. I figure they cant be that bad can they?
 
H

Highbredcloud

Active Member
Mar 4, 2003
1,075
1
36
Palos Hills, IL
Feb 11, 2004
#15
  • Feb 11, 2004
  • #15
25thmustang said:
Well Im getting it for $100, and for both classes I plan to run in the future (NMRA Factory Stock/ and Real Street) I have to run 75mm or less. That means no C&L 76, no Pro M 77 or 80s. I figure they cant be that bad can they?
Click to expand...

$100.00 sound like a good price, however, the performance out of the 75mm bullet is less the what C&L got out of the 73mm...I read it somewhere...As far as you classes go...Don't they allow a max of 80mm?

http://stangcrazy.com/factorystock/rules/nmra/index.htm
http://stangcrazy.com/realstreet/rules/nmra/index.htm

according to the 2003 rules you can use a 80mm MAF...
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Feb 11, 2004
#16
  • Feb 11, 2004
  • #16
I noticed that after making the post, but I was told only up to 75mm...

Either way I have a 75 coming for $100.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Feb 11, 2004
#17
  • Feb 11, 2004
  • #17
Highbredcloud said:
they do make ones in chrome as well...your is probably the thick plastic one used on the Pro-M 80mm...if you ever going to upgrade the car h/c/i you may want to step up in the MAF department...
Click to expand...
yup,,,it matches the rest of my cai--( Dense Air Charger )
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
633
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
1
Engine 91 mustang 302 Low acceleration car backfires pops and acts like it doesn’t want to take fuel
  • 1991Fox5.0
  • Oct 4, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 6, 2025
1991Fox5.0
1
Z
Engine New head for ‘88 mass air converted foxbody
  • zahirayunus
  • Dec 13, 2024
  • Fox 5.0 Mustang Tech
Replies
0
Views
209
Fox 5.0 Mustang Tech Dec 13, 2024
zahirayunus
Z
8
Fox Mass Air Flow 42lb injectors
  • 89wreck
  • Aug 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
793
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 5, 2025
Scrapla347
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
233
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?