• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

mass air question

  • Thread starter Thread starter fastford91
  • Start date Start date Oct 19, 2007

fastford91

New Member
Aug 15, 2006
254
1
0
Niagara ,Ontario, Canada
Oct 19, 2007
#1
  • Oct 19, 2007
  • #1
OK Ive been having troubles with my mass air ever since my motor build up! when i put it all back together and hooked it up it runs rich and farts and bucks and runs like crap! so Ive been running it unplugged now for awhile with no ill effect! so i figured the electrical unit was faulty so i go to the wreckers and get one out of a 95 3.8l mustang! it plug and play hooked it up no probs car ran great! so i thought well ill take the electrical off the new one and put it on the other unit the old mass air and see if it works so i take the old electrical unit off swap it for the new unit i just got hook it all up and take her out for a spin! and it stats farting and bucking and running like **** again! so i swapped them out again and put the 95 mass air back in and it runs great! my question is why wouldn't the other mass air units work even with the 95 electrical hooked up? but the whole 95 unit works fine? i dont know! i guess ill just have to buy the adapter for the 95 and run that one then! unless anyone here knows whats up? the othe mass air units are a pro flow and a C&L both brandnew! i would like to use one of these because they look nicer than the 95 one!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 19, 2007
#2
  • Oct 19, 2007
  • #2
I did not follow that exactly, but you MUST use the housing that comes with a given MAS sensor. If you use the 95 sensor (part number F2.......), you HAVE to use the 95's housing as well.

If you put the 95's sensor in the fox 55 mm housing, you should run a good bit rich.
 

fastford91

New Member
Aug 15, 2006
254
1
0
Niagara ,Ontario, Canada
Oct 19, 2007
#3
  • Oct 19, 2007
  • #3
ok thats what i was wondering!
 
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
597
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
513
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
405
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?