• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Max HP for Edelbrock Intakes??

  • Thread starter Thread starter Dan Gray
  • Start date Start date Jun 22, 2009

Dan Gray

Founding Member
Oct 27, 2002
93
0
6
Coquitlam, BC, Canada
Jun 22, 2009
#1
  • Jun 22, 2009
  • #1
Im curious if anyone has dyno tested edelbrocks intakes for max HP or if anyone knows the flow numbers on them?

The reason im asking is i recently rebuild my 331 motor which last year my 635ft and 734hp to the wheels. This year i changed to a bigger cam and traded my T-trim head unit for a YSI head unit but after dyno thrashing it on the weekend i could only come up with 585ft lbs and 700 HP to the wheels. So with only changing the cam and the blower Im wondering if i choose too big of a cam that im loosing cylinder pressure or if the blower is bigger and flowing more air causing a flow problem into my engine.

Now i am running the Edelbrock RPM II intake manifold and im wondering if there is a limitation to this intake or if they dont like to distribute the air under high boost(20# @ 6000RPM) with the long runner design.

I have been looking at some guys in the renegade classes and it looks like they like to use the Trickflow Box style intake. Im just curious if anyone has tested intakes under forced induction or if anyone has some info before i go out and buy a different intake.

Thanks
Dan
 

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
Jun 22, 2009
#2
  • Jun 22, 2009
  • #2
i think that intake is about maxxed out, definitly switch to the Box-R.

Also, is the car intercooled? I would bet with that much boost, and if you have no intercooler that the IAT temps are getting pretty high.
 

Dan Gray

Founding Member
Oct 27, 2002
93
0
6
Coquitlam, BC, Canada
Jun 22, 2009
#3
  • Jun 22, 2009
  • #3
No, no intercooler but i do run the snow performance meth kit to keep the temps down. But thanks for the info/idea.
 

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
Jun 23, 2009
#4
  • Jun 23, 2009
  • #4
sounds like the car is pretty serious, personally i'd run a air to water intercooler, and ditch the methanol injection.

they did a test on a car in MM&FF a while back and put a vortch mondo box intake on it, with a water tank in the trunk and gained like 100 hp to the tires. I'll loook for the article
 

Dan Gray

Founding Member
Oct 27, 2002
93
0
6
Coquitlam, BC, Canada
Jun 24, 2009
#5
  • Jun 24, 2009
  • #5
Oh wow, thanks. Ill take a look for that article
 
You must log in or register to reply here.

Similar threads

Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
J
Engine Running like crap :(
  • justadude07
  • Sep 27, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Oct 19, 2025
DadLife0724
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
396
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
492
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
599
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?