• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

May have fixed surging idle...

  • Thread starter Thread starter Skoobie
  • Start date Start date Apr 22, 2006

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
Apr 22, 2006
#1
  • Apr 22, 2006
  • #1
Well I upgraded my ground connections and advanced my timing a few degrees and it feels like a whole new car. The idle is rock solid, if not a tad high (around 1000-1050 rpm). And I have a lot more power. Spin em through second and chip third. Throttle responce is way better too. I have a spacer plate on the IAC that I monkey'ed with extensively trying to fix the surge so I think I can get the idle back to normal with that (Im guessing the screws are adjusted to tight). Guess what they say is true, you can never have too many grounds

::EDIT:: I have a really crappy timing light so Im not 100% sure what I initial timing was set too. I think its around 15deg. If its advanced too far I know I'll get pinging but Im not really sure what that sounds like. Does it happen across the rpm range or in specific ranges if your advanced too much? What does it sound like? Sorry kinda newbie'ish questions I just dont want to break anything
 
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
Apr 22, 2006
#2
  • Apr 22, 2006
  • #2
another thing you can do for a surging idle that my buddy did was port your IAC but just barely. Now his car has no surging what so ever.
 

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
Apr 22, 2006
#3
  • Apr 22, 2006
  • #3
snoboardcore said:
another thing you can do for a surging idle that my buddy did was port your IAC but just barely. Now his car has no surging what so ever.
Click to expand...
I was going to ask about that. Like I said I have one of those spacers with the allen screws that lets you adjust the air flow at idle. Its suppose to eliminate the surge. I had heard about opening that gap in the IAC but I thought that was just the cheap do it yourself version of the idle plate? What happens if you have both? I dont really want to start taking material off the IAC if its not going to do anything...kinda hard to put that stuff back on. hehe
 

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
Apr 22, 2006
#4
  • Apr 22, 2006
  • #4
Well I went out for a run to see if there was any detonation but things seem ok. The idle hangs between shift though then settles to around 1k or so. What would cause the hanging? Also I tried to adjust the idle plate to bring the idle down to 800 ish but nothing happened. I unplugged the IAC to see what would happen...again nothing happened. What SHOULD happen if you unplug the IAC? I thought it would die.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 23, 2006
#5
  • Apr 23, 2006
  • #5
Have you been through the Surging Idle Checklist Sticky?

Not sure what you mean by the hanging rpm between shifts, but the computer will keep the rpms a little higher when the vehicle is moving. Just a couple hundred rpms though.
 

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
Apr 23, 2006
#6
  • Apr 23, 2006
  • #6
If I push in the clutch in while moving the idle stays at X or even raises up a couple hundered RPM above X before it settles back down slowly. Thats a new one. I have gone over the list. I actually replaced the IAC after cleaning my old one and breaking off the ear after over torqing. The problem is though that absolutely NOTHING changes when i unplug the IAC. What should the voltage be in the connector? I havent tried that.
 

795.0pacecar

lover of pudgy polygamists
Jul 11, 2003
480
0
17
Senoia, GA
Apr 23, 2006
#7
  • Apr 23, 2006
  • #7
Is the idle on the trottle body set too high? You should set the idle to be around 600 rpms with the IAC unplugged. Then reset the TPS.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 23, 2006
#8
  • Apr 23, 2006
  • #8
Skoobie said:
If I push in the clutch in while moving the idle stays at X or even raises up a couple hundered RPM above X before it settles back down slowly. Thats a new one. I have gone over the list. I actually replaced the IAC after cleaning my old one and breaking off the ear after over torqing. The problem is though that absolutely NOTHING changes when i unplug the IAC. What should the voltage be in the connector? I havent tried that.
Click to expand...
Do yourself a favor - Carefully read the sticky "Help me create the Surging Idle Checklist" at the top of the forum for help with your idle problems. The first most contains all the updates to the fixes. I continue to update it as more people post fixes or ask questions.

It also gives specific information on how the IAC operate. It spells out what the voltage is and what the waveform that the computer uses to control the IAC is like.
 
You must log in or register to reply here.

Similar threads

8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
356
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
Engine Surging idle on start-up
  • keel
  • Aug 11, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 31, 2025
keel
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
K
88 speed density misfire and bucking
  • kush
  • May 29, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
403
Fox 5.0 Mustang Tech Jun 8, 2026
DadLife0724
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
238
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?