Mechanic Woes

JD1964 · Oct 25, 2015

Don't you hate it when you loose a razor blade? I mean, if loose a screwdriver bit and dig it up some day, big deal. But a razor blade? I don't wanna find that while digging under my car seat another time....

Boosted92LX · Oct 25, 2015

Yeah, that could definitely turn out less than favorable. A single loose blade or one that fell out of a box cutter?

JD1964 · Oct 25, 2015

Boosted92LX said:
Yeah, that could definitely turn out less than favorable. A single loose blade or one that fell out of a box cutter?

Single loose. It happens all the time to me. Had it in my hand a few seconds ago, then can't find it. Frustrating!~ When it happens, I can't move on until I find it. Took me 20 mins this time. If it was a snake it woulda bit me , LOL. But I found it.

Adieu · Oct 27, 2015

I once lost a hacksaw blade under the hood of my '75 Chevy pickup. I looked under it, all over the engine bay (which is huge on those trucks, it was hard to lose something in there). I found it, two years later, when I scraped the back of my arm on it changing the starter, it was laying on the lower control arm. A razor blade would've been much worse.

stykthyn · Oct 27, 2015

I just usually can't remember where I left my beer.

Boosted92LX · Oct 27, 2015

thought I was only one that did that.

stykthyn · Oct 27, 2015

Never fails. (Successfully install/remove insert random part here) take victory swig....where did I put that damn thing?

Boosted92LX · Oct 27, 2015

Yeah, well my son gives me crap about me going senile.. to tell the truth, I think he does it to convince me I am, and makes off with dear ol' dad's beer. Dang kids.

stykthyn · Oct 27, 2015

I'd do it to make off with your beer too

Shakerhood · Oct 28, 2015

A few years ago I needed a few special copper washers for a task I was doing, told myself I can't lose them... Needless to say I still have not come across them anywhere, no idea where I set them down.

Mintsick · Oct 28, 2015

I hear ya, I once "lost" a 3/8" ratchet under the hood of a s10 pickup as a teenager, only to be found several years later when swapping out a radiator.

89oem · Oct 28, 2015

Where'd I put that confounded bridge

JD1964 · Oct 28, 2015

I never loose my beer

A5literMan · Oct 29, 2015

John Dirks Jr said:
I never loose my beer

I do...my son drinks them. The little thief...I had him house sit a few weekends ago and my 1/2 bottle of gin disappeared also. He is 22

Boosted92LX · Oct 29, 2015

John Dirks Jr said:
I never loose my beer

You obviously don't drink much beer.

FoxMustangLvr · Oct 29, 2015

The nice thing about where I live is during the winter your drink never gets warm so if you misplace it it's still cold (if not colder) when you find it. The bad thing about where I live is we have winter and it gets cold here.

BMW Rider · Oct 29, 2015

Mintsick said:
I hear ya, I once "lost" a 3/8" ratchet under the hood of a s10 pickup as a teenager, only to be found several years later when swapping out a radiator.

I left a 3/8 swing handle and extension under the hood of a car that I did an engine overhaul in. The owner picked up the car and drove it to Mexico and back to Canada; when he brought it back for a service, I found my tools.

Foxstang31 · Oct 29, 2015

I dropped a flathead screwdriver in my engine bay the other day heard it clank down somewhere. Looked on the ground, engine bay, k member, still haven't found it. I think I looked for an hour...

Mechanic Woes

JD1964

there is enough sticking out to grab on to

Boosted92LX

It's only an inch or two. What's the big deal?

JD1964

there is enough sticking out to grab on to

Adieu

Easy there, this ain't a dating site.

stykthyn

I want to measure mine. It doesn't look that tall.

Boosted92LX

It's only an inch or two. What's the big deal?

stykthyn

I want to measure mine. It doesn't look that tall.

Boosted92LX

It's only an inch or two. What's the big deal?

stykthyn

I want to measure mine. It doesn't look that tall.

Shakerhood

Mintsick

89oem

Mustang Master

JD1964

there is enough sticking out to grab on to

A5literMan

At least it is lumpy...

Boosted92LX

It's only an inch or two. What's the big deal?

FoxMustangLvr

I love my Pimp

BMW Rider

Mustang Master

Foxstang31

Member

Similar threads

Mechanic Woes

there is enough sticking out to grab on to

It's only an inch or two. What's the big deal?

there is enough sticking out to grab on to

Easy there, this ain't a dating site.

I want to measure mine. It doesn't look that tall.

It's only an inch or two. What's the big deal?

I want to measure mine. It doesn't look that tall.

It's only an inch or two. What's the big deal?

I want to measure mine. It doesn't look that tall.

Mustang Master

there is enough sticking out to grab on to

At least it is lumpy...

It's only an inch or two. What's the big deal?

I love my Pimp

Mustang Master

Member

Similar threads

Privacy & Transparency

Privacy & Transparency