• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Mechanical or Electronic Distributor???

  • Thread starter Thread starter FordRacing302
  • Start date Start date Oct 1, 2005

FordRacing302

5 Year Member
Oct 1, 2005
384
42
59
Cleveland, TN
Oct 1, 2005
#1
  • Oct 1, 2005
  • #1
I have an 83 GLX that the previous owner dropped a carbed 5.0 inplace of the factory EFI V6...The problem is the car doesnt run, its gets gas but no spark, And its a huge mess of wires under the hood mainly becasue of all the old EFI system. So i wanna take the cheap and easy way out and buy a regular mechanical vacuum advanced distributor and put that in place of the electronic one, BUT my dad wants me to mess with all the electronics and figure out the wiring nightmare to get it runnin......I like the my idea a helluva lot better, but my dad wont let me buy the new distributor until i get a second opinion....So what do yall think i should do?
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 1, 2005
#2
  • Oct 1, 2005
  • #2
If it's carbed you HAVE to run an old-style mechanical distributor if you want to have any ignition advance. The EFI dizzy has advance that is electronically supplied by the efi/electronic ignition; you can't use it with a carb for street cars that need advance.

If you're sticking with a carb you can/should do away with all the non-related efi wiring. Tell your dad this is from another 'old' dad.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 1, 2005
#3
  • Oct 1, 2005
  • #3
Crane Cams makes a really nice distributor for carb'd cars with an electronic version of the mechanical advance. See http://www.cranecams.com/index.php?show=browseParts&lvl=4&prt=127 for more info
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 1, 2005
#4
  • Oct 1, 2005
  • #4
That's a nice piece -- I got the impression he was trying to keep it to a bit tighter budget though....

Do you know if the gear material is compatible with the roller cams in the HO's?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 1, 2005
#5
  • Oct 1, 2005
  • #5
Michael Yount said:
That's a nice piece -- I got the impression he was trying to keep it to a bit tighter budget though....

Do you know if the gear material is compatible with the roller cams in the HO's?
Click to expand...
Excellent question - the info on their site does not give any clues. I would suspect that the standard product would be for non roller cams. Contact them and I'm sure they have an answer or fix.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 1, 2005
#6
  • Oct 1, 2005
  • #6
FWIW IIRC (LOL - enough acronyms?), a roller-motor uses a steel gear (JR and Yount both know that, but someone else might not. Plus if my memory is faulty, someone can correct me).

Good luck with the project.
 

FordRacing302

5 Year Member
Oct 1, 2005
384
42
59
Cleveland, TN
Oct 1, 2005
#7
  • Oct 1, 2005
  • #7
Thanks for all the advice guys...Im on a really tight budget, and I paid $300 for the car so I dont wanna spend big bucks. I just wanna find the cheapest, easiest way to get the car running...Autozone has a core charge of the distributor I need for $39.99 and it has a lifetime warranty, So I think im gonna go with that

Thanks for all the help
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 1, 2005
#8
  • Oct 1, 2005
  • #8
It's easy to recurve that distributor and the performance will improve significantly. I'd set it up for about 14-16 degrees initial timing, and about 34-36 degrees total all in by about 3000 rpm. The carbed motor will love that. If it has vacuum advance, after the recurve described above, you can do away with the vacuum advance altogether.
 
You must log in or register to reply here.

Similar threads

F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
683
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
180
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
P
Engine Carb'd 88 GT, need centrifugal advance, will an '85 Distributor Work?
  • pindude80
  • May 12, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
1K
Fox 5.0 Mustang Tech May 13, 2024
limp
P
Engine Swapping EFI distributor for carb distributor- shaft length is different
  • pindude80
  • Jul 20, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
1K
Fox 5.0 Mustang Tech Jul 21, 2024
pindude80
P
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?