• Community Forums
  • Regional Forums and Event Information

Melbourne area stangs

  • Thread starter Thread starter BlackMagic
  • Start date Start date Nov 1, 2001
Prev
  • 1
  • …
  • 321
  • 322
  • 323
  • 324
  • 325
  • …
  • 431
Next
First Prev 323 of 431 Next Last

Glenn88lx

Founding Member
Sep 15, 2002
328
0
0
Cocoa, Fl
Mar 2, 2003
#6,441
  • Mar 2, 2003
  • #6,441
Originally posted by erichmess_
Don't get too excited. I found out Dan's and Adam's numbers, looks like it may be a little whacked out.
Click to expand...

Dan's numbers sound pretty close to me. A 98 Mustang is rated at about 225 FWHP right? Subtract about 18-20% for driveline loss when running an automatic and your there. If it were a stick the loss would be more along the lines of 12-15% since you don't have all the internal friction of the automatic.

Another thing to consider is the air quality. For instance, at 3PM yesterday the temp was 79*F, Baro 29.93 in/hg and the dewpoint was 68*F. That will result in about a 1-2% drop in power right there due to the lower air density.

So taking your rated HP of 225 and deducting a minimum of 19% and a maximum of 22% gives you a range of 175-182 RWHP. Not knowing what mods Dan has that would add a few more RWHP to the end numbers.

If Dan has some dragstrip performance numbers and knows the race weight of the car he could check the dyno figures against a HP calculator. I have found these calculators to be very good estimators of HP and good tuning aids as well.

Dyno Calculator
 

Wolfhound

Founding Member
May 24, 2002
1,046
0
0
Space Coast, Florida
Mar 2, 2003
#6,442
  • Mar 2, 2003
  • #6,442
They just dynoed a Mustang on TNN and it only came up to 177. I think it was a 96 Stang.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Mar 2, 2003
#6,443
  • Mar 2, 2003
  • #6,443
Originally posted by joholder
They just dynoed a Mustang on TNN and it only came up to 177. I think it was a 96 Stang.
Click to expand...

Im watching that too, after they Put on the 75 MM TB and Cold air they got up to 188 RWHP. It was pretty stupid of them to put on a 75 MM TB for that car, its very very far from needing a 75 MM TB, I know w/ my 5.0 that would not be good.


HI DAN
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Mar 2, 2003
#6,444
  • Mar 2, 2003
  • #6,444
Originally posted by BlackMagic
my car only put down 195rwhp and 257rwtq seems a little off to me,
Click to expand...


Still have a ways to catch me , going to have along ways once that Cobra Intake and C&L go on
 

5.0's 4 ever

The #1 Stunna
Founding Member
Jan 22, 2000
5,794
0
76
Orlando, FL
Mar 2, 2003
#6,445
  • Mar 2, 2003
  • #6,445
Originally posted by Striped5.0
Im watching that too, after they Put on the 75 MM TB and Cold air they got up to 188 RWHP. It was pretty stupid of them to put on a 75 MM TB for that car, its very very far from needing a 75 MM TB, I know w/ my 5.0 that would not be good.
Click to expand...

I don't see why they think that engine needs a 75mm tb, stock i think they have a 70mm which i think is already overkill for a 96-98 4.6 sohc unless you have a blower on it. I'm looking for around 490rwhp when I am done with my 88 and I am only using an Accufab 70mm tb.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Mar 2, 2003
#6,446
  • Mar 2, 2003
  • #6,446
Originally posted by 5.0's 4 ever
I don't see why they think that engine needs a 75mm tb, stock i think they have a 70mm which i think is already overkill for a 96-98 4.6 sohc unless you have a blower on it. I'm looking for around 490rwhp when I am done with my 88 and I am only using an Accufab 70mm tb.
Click to expand...

I hear ya, My friends 91 GT is pushing 510 RWHP and hes only running a 65 MM TB. I dont see how they went from 178 to 204 RWHP on the dyno from that oversize TB which would hurt them more then help them and the Cold air kit and just the cat back for the exhuast.
 

5.0's 4 ever

The #1 Stunna
Founding Member
Jan 22, 2000
5,794
0
76
Orlando, FL
Mar 2, 2003
#6,447
  • Mar 2, 2003
  • #6,447
What I couldn't believe is how much they made from that flowmaster cat-back. The cat-back is the least restrictive part in the whole stock exhaust system, on a stock car you are lucky to see a 5rwhp increase.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Mar 2, 2003
#6,448
  • Mar 2, 2003
  • #6,448
Yeah no kidding, I cant belive they went from 178 to 204 w/ just those few bolt ons. It must be an auto too since they only pulled 178 when it was stock. W/ full exhuast, headers, O/R H pipe and 2 Chamber flows 2.5 in all the way through I Pulled 210 On the dyno. Could have pulled more b/c Im in need of a tune up and am running a rich A/F Ratio. Thing is they did those runs on a dyno jet and those are usually pretty accurate, I still dont get it though, that car must be tunned to perfection to pick up that much HP w/ just those few things done to it, either that or its total BS
 

eric kebbel

Founding Member
Aug 1, 2002
347
0
0
sunny central fla
Mar 2, 2003
#6,449
  • Mar 2, 2003
  • #6,449
well

yup the deal is done so soon my car will make this loud whinnig nosie hey t j pulled 302 on that dyno so i was impressed
 
S

slow97Cobra

New Member
Feb 23, 2003
61
0
0
Merritt Island, Florida
Mar 2, 2003
#6,450
  • Mar 2, 2003
  • #6,450
what did tj pull eric? and what did adam pull?
 

Glenn88lx

Founding Member
Sep 15, 2002
328
0
0
Cocoa, Fl
Mar 2, 2003
#6,451
  • Mar 2, 2003
  • #6,451
Originally posted by Striped5.0
Yeah no kidding, I cant belive they went from 178 to 204 w/ just those few bolt ons. It must be an auto too since they only pulled 178 when it was stock. W/ full exhuast, headers, O/R H pipe and 2 Chamber flows 2.5 in all the way through I Pulled 210 On the dyno. Could have pulled more b/c Im in need of a tune up and am running a rich A/F Ratio. Thing is they did those runs on a dyno jet and those are usually pretty accurate, I still dont get it though, that car must be tunned to perfection to pick up that much HP w/ just those few things done to it, either that or its total BS
Click to expand...

Come on now, you don't really think they could install parts built by the sponsers of the TV show and not show a significant power increase do you?

If you believe that, then your a bit gullible. The bit about the throttle body is pure

My 302 ran 11.9 at 115 with a 65mm TB, so there is no way that puny 4.6 needed anything bigger than stock size to make ~200 RWHP
 

Topstang2001

New Member
Jan 14, 2003
227
0
0
Cocoa,Florida
Mar 2, 2003
#6,452
  • Mar 2, 2003
  • #6,452
Well TJ's stang pulled at 302 hp at the wheels.Which was way more than anybody expected even TJ.
I got my car done to and pulled a 310 rwhp and 324 lb of torque.So I guess after you do the math my motor is what round 350 to 360 hp.I was happy for only haveing the vortech with their generic program and only flowmasters on the stock 2 1/4 pipes.Well looks like Im going to get the steeda tune here real soon.The Steeda techs there said I should at least get 350 to 360 rwhp with their tune.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Mar 2, 2003
#6,453
  • Mar 2, 2003
  • #6,453
Originally posted by Glenn88lx
Come on now, you don't really think they could install parts built by the sponsers of the TV show and not show a significant power increase do you?

If you believe that, then your a bit gullible. The bit about the throttle body is pure

Click to expand...

No Kidding, I never did belive it, not w/ more Mods on my 95 5.0 and only pulling 6 More HP on the dyno then that 96 4.6 did. Especially w/ an Over size TB. Its wrong of them to do that b/c peope who dont know that much about cars are going to go out putting on 75 MM TB and 3 in exhast and be thinking the whole time that bigger is better. Sad thing is that well all know they fudged the #'s, just sad that they had to do it in the first place
 

eric kebbel

Founding Member
Aug 1, 2002
347
0
0
sunny central fla
Mar 2, 2003
#6,454
  • Mar 2, 2003
  • #6,454
hey dan & josh ?

or topstang did you get the flyers i put on your car please pass post staple them out an come on down here to vero everybody for a fun day i m shure we will have a _good damn time
 

dg28182

Founding Member
Aug 27, 2002
633
0
0
Melbourne, FL
Mar 2, 2003
#6,455
  • Mar 2, 2003
  • #6,455
TJ got 302 at the wheels, Adam got 240 something.. so I heard.
I got plenty of pictures.. may put them up tomorrow.. or perhaps Dan will for me.

Anybody want one of those huge Mach 1 posters? I have about 10 of them.

The drive home was fun. Dan TJ off the line and up until TJ got into 3rd gear...:damnit:
 

BlackMagic

Active Member
May 26, 2001
2,808
0
46
Central Florida
Mar 2, 2003
#6,456
  • Mar 2, 2003
  • #6,456
Originally posted by dg28182
The drive home was fun. Dan TJ off the line and up until TJ got into 3rd gear...:damnit:
Click to expand...
yeah, i guess me and my 195 HP aint soo bad after all

eric, i did get the flyers off of josh's car gave 1 to TJ and will spread the rest tomorrow
 

Topstang2001

New Member
Jan 14, 2003
227
0
0
Cocoa,Florida
Mar 2, 2003
#6,457
  • Mar 2, 2003
  • #6,457
And TJ was the one saying not to do anything that would get us in trouble.LOL. But Im not saying what we was doing tho.
O and btw..My 310 rwhp and 324 lb owns you all.


That last line was for ****s and giggles.
 

5.0's 4 ever

The #1 Stunna
Founding Member
Jan 22, 2000
5,794
0
76
Orlando, FL
Mar 2, 2003
#6,458
  • Mar 2, 2003
  • #6,458
Somebody needs to put some pics up. I couldn't go on saturday because I worked and today I thought it was going to stay crappy so I got carried away working on my convertible.
 

BlackMagic

Active Member
May 26, 2001
2,808
0
46
Central Florida
Mar 2, 2003
#6,459
  • Mar 2, 2003
  • #6,459
top 20 in the car show....i was very happy when i left there today
 

BlackMagic

Active Member
May 26, 2001
2,808
0
46
Central Florida
Mar 2, 2003
#6,460
  • Mar 2, 2003
  • #6,460
 
Prev
  • 1
  • …
  • 321
  • 322
  • 323
  • 324
  • 325
  • …
  • 431
Next
First Prev 323 of 431 Next Last
You must log in or register to reply here.

Similar threads

K
Introduction
  • kleach
  • Feb 10, 2026
  • The Welcome Wagon
Replies
1
Views
115
The Welcome Wagon Feb 10, 2026
gkomo
F
Help with air bag code 2293
  • Felwinters
  • Apr 23, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
82
2005 - 2009 Specific Tech Apr 23, 2026
Felwinters
F
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
121
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
F
Need body/paint shop in san jose area
  • FordFan
  • Nov 13, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
6
Views
639
1965 - 1973 Classic Mustangs -General/Talk- Nov 21, 2025
Noobz347
S
Rust under side window weatherstrip
  • swe13
  • Jun 5, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
135
2005 - 2014 S-197 Mustang -General/Talk- Jun 5, 2025
swe13
S
Share:
Bluesky Email Share Link
  • Community Forums
  • Regional Forums and Event Information
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?