• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Mild street combo help

  • Thread starter Thread starter 89five0
  • Start date Start date Apr 7, 2005
8

89five0

New Member
Nov 28, 2003
50
0
0
Apr 7, 2005
#1
  • Apr 7, 2005
  • #1
I have the chance to buy a brand new Cobra intake manifold upper and lower, all hardware, etc for $350. I plan on setting my car up for a mild street setup that will provide descent #s and times. I very rarely go to the track as of now. The combo i had in mind is this:
Cobra intake,
GT40 turbo swirl heads
65mm TB
73mm Mass air meter
Stock cam
the questiong i have are what Roller Rockers are needed? Also what else should i upgrade that will perform well with this STREET setup? i would like to maintain daily driven drivaiblilty since i do drive this everyday. My mods are in my sig and 373s will be added soon. thanks
 

85mcLaren

Member
Feb 26, 2004
45
0
7
Apr 7, 2005
#2
  • Apr 7, 2005
  • #2
If you are going to keep the stock cam, I would suggest some 1.7 rockers - as long as the valves are not too big for the valve reliefs on the pistons. You will not be able to take advantage of the GT40s unless you can get that lift up a little. Stock of course with 1.6's is only .444 lift.
 

notchback

Founding Member
May 30, 2000
1,950
0
36
St Clair Shores MI
Apr 7, 2005
#3
  • Apr 7, 2005
  • #3
go w/ the 1.7's since you have stock cam, if your keeping the stock injectors, do a 190 pump to be safe , and thats it.....very good combo that should run 12's w/ some cheater slicks
 
8

89five0

New Member
Nov 28, 2003
50
0
0
Apr 7, 2005
#4
  • Apr 7, 2005
  • #4
thanks for the help. ANy reccomendations on the RR? so everything i have listed is fine then right? i just need to add the Fuel pump then. Oh i dont need to change my headers for the turbo swirls right? anyways thanks again
 
You must log in or register to reply here.

Similar threads

SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
TTSaleen's Foxbody Project
  • TTSaleen
  • Apr 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Monday at 6:15 AM
TTSaleen
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
New combo
  • 87slow.0
  • Oct 19, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2022
87slow.0
Anyone have a AFR185 "Enforcer" and Explorer intake combo?
  • reddy351
  • Jan 20, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 2, 2023
rednotch
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?