Missing Sensor

[slow5.0gt]

I just got a cold air intake from my friend BBK, after hooking up the connections I notice that i have a third place on the intake to hook something up but I do not have anything to put in there.
I have the hose coming from the IAC and the valve cover connected what am i missing? The place for the sensor is close after the maf housing. Typically this is where the heat sensor goes? underneath the intake usually... but im not finding anything.

Thanks in advance!

 

[SaleenGT2001]

IAT sensor

 

[slow5.0gt]

I have no sensor to put in there. The stock intake that i have doesnt have a place for a 3rd sensor either. just the IAC and valve cover hose thats it.

 

[98COBRA281]

you have to, is it still in the old intake

 

[slow5.0gt]

you have to, is it still in the old intake

thats what im talking about there are only 2 places to hook up a hose or a sensor besides the maf into the OEM peice that I have.

 

[screamin gt]

 

[slow5.0gt]

View attachment 323525
bottom


View attachment 323526
top
View attachment 323527
As you can see where the bolt is at...

 

[COramprat]

The IAT inlet on the stock piece should be right where it attaches to the MAF housing.

 

[slow5.0gt]

The IAT inlet on the stock piece should be right where it attaches to the MAF housing.

Im using the stock housing for the maf and no place to put a 2nd sensor there either just the place for the maf

 

[SaleenGT2001]

doesnt the 02-04 have the IAT in the MAF??

how many wires are coming out of the maf??

 

[lvmustanggt]

my 02 got iat in the maf. that with saparete iat was in older model. Just plug the hole and you are good to goo.

 

[slow5.0gt]

heh after taking a look at the maf i do see the resistor for the iat but i just wanted to make sure i was not missing anything!

 

[lvmustanggt]

heh after taking a look at the maf i do see the resistor for the iat but i just wanted to make sure i was not missing anything!

can you tell me if your IAT is strait or little off. Mine is not strait and was thinking might be bad.

 

[screamin gt]

didn't know 02-04 was different, good to know.

 

[slow5.0gt]

can you tell me if your IAT is strait or little off. Mine is not strait and was thinking might be bad.

mines straight if its not its not too bad its just a resistor so i dont think that it will get affected that much (i assume)

 

[lvmustanggt]

mines straight if its not its not too bad its just a resistor so i dont think that it will get affected that much (i assume)

on mine front probe is straight but back one is not.