MM caster camber ?

[Henrypb]

I was just wandering what orientation those of you that have installed Maximum Motorsports' caster camber plates have set them at; positive or negative orientation. The reason I ask is my alignment guy couldn't get the car alighned right. Thanks in advance

 

[Aaron 4.6]

If he can't align the car with the C/C plates, the plates are either incorrectly installed or he the wrong guy to have aligning your car. There's nothing remarkable about aftermarket C/C plates. They simply give more adjustment room than the stockers.

 

[4.6_02_Black_GT]

Henry MM instructions tell you on a "majority of car positive orientation is okay" if you have trouble regaining stock alignment or if you what a custom road race setup you may have to swap the top plates to gain the negative orienation.

 

[4.6_02_Black_GT]

heres mine installed

 

[Henrypb]

Cool. Thanks for the info

 

[wms004]

is it possible to align it yourself with the instructions they give you?

 

[Aaron 4.6]

Well, the instructions tell you how to install the C/C plates, not align the car. You can lay masking tape down and mark the locations of the strut top before the install. If you position the strut top in the same place after install you should be fairly close. Close enough not to need to pay for an alignment.

To do a true alignment you will need a few more instruments...

 

[warment]

heres mine installed

My MM plates are installed the same way with no alignment problems...

Bill

 

[GinoGT]

Looks like Tokico Illuminas too, nice choice.

And what's that thing in the background with the yellow "S" on it?

 

[4.6_02_Black_GT]

yeap they are 5-way Illuminas,

The thing with an is "Stinger Audio" ..its a 2/4 guage inline ANL fuse holder 125amp. Its my main power lead that goes to the trunk where I have my amps mounted.