• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

MM strut tower brace problem

  • Thread starter Thread starter xpeteyjtx
  • Start date Start date Mar 7, 2006
X

xpeteyjtx

New Member
Dec 29, 2005
108
0
0
Taunton, MA
Mar 7, 2006
#1
  • Mar 7, 2006
  • #1
I think that I am making this installation harder than it's suppose to be. I bolted the strut tower brace to the firewall, but the passenger side strut tower has a stupid bracket on it, so it wont allow the strut tower brace to move into place.
Here are some pics:

This is the passenger side strut tower. You can see the thing that is in the way of the strut tower brace.

Here is the top view.


Did I do something wrong? Or is my car really messed up. You can see in the first pic that the strut tower brace cannot become flush with the strut tower because of that stupid thing.

Here are some other pics:

Passenger side firewall

Driver's side strut tower

Driver's side firewall


So what should I do? Should I place the MAF bracket over the strut tower brace? Thanks for the help and sorry for the long post.
 
C

criticman

Member
Sep 7, 2003
723
1
16
Rome, GA
Mar 7, 2006
#2
  • Mar 7, 2006
  • #2
My BBK unit mounted a bit differently. In any event, all I recall having to move was the wiring and plastic wire sleeve on the driver side.

I can't tell what that is on the passenger side from the pics - maybe b/c it is a convertible?
 
X

xpeteyjtx

New Member
Dec 29, 2005
108
0
0
Taunton, MA
Mar 7, 2006
#3
  • Mar 7, 2006
  • #3
Im guessing that its the MAF bracket, right?
I thought this thing was suppose to fit perfectly.
I will see what I can do tomorrow.
 
C

criticman

Member
Sep 7, 2003
723
1
16
Rome, GA
Mar 7, 2006
#4
  • Mar 7, 2006
  • #4
I will post you a pic of mine. Also, I was wrong - I had to move the passenger side wiring.
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Mar 7, 2006
#5
  • Mar 7, 2006
  • #5
Did you get the instruction sheet with it? If not, get it HERE.

See step #2 and just after step #11.



.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Mar 7, 2006
#6
  • Mar 7, 2006
  • #6
Congrats on the MM purchase. In my opinion it is the best unit out there.

Some vehicles do require some clearancing of the maf bracket. All I did with mine was hit it with a file for a few minutes, to give it a little clearance.

Also, you can enlarge the holes in the maf bracket (a little), to help it rotate out of the way a little more.

I don't think this is a major issue, it just requires a little tweaking.

jason
 
C

criticman

Member
Sep 7, 2003
723
1
16
Rome, GA
Mar 7, 2006
#7
  • Mar 7, 2006
  • #7
Here is a pic of my BBK strut tower brace on the passenger side. I hope that helps.

Note: I upgraded the bolt hardware - the "stock" BBK stuff rusted. Not sure what came with your Maximum Motorsports kit...but just a thought.

View attachment 484487
 
X

xpeteyjtx

New Member
Dec 29, 2005
108
0
0
Taunton, MA
Mar 7, 2006
#8
  • Mar 7, 2006
  • #8
Yea I got the instructions and all that good stuff. I understand that I need to unmount the MAF bracket, BUT, when I attempt to remount the bracket, I won't be able to remount it because the strut tower brace will be in the way. I guess I could create different holes for the bracket, but I don't really feel like doing that, as I will be creating 6 holes already for the brace

This is what I will do...
I will unmount the bracket, install the brace, and then remount the bracket over it. If I cant remount the bracket with both screws, I will just use one... that should be enough.

I'm only making a big deal over this because I would think that MM would slightly modify the brace so that it wouldn't touch the brace. I mean, only a little piece of the brace actually overlaps. Or... maybe there is something wrong with my car

Ok, thanks a lot guys, goodnight
 

Henceforward

The Avatar Master
Founding Member
Jul 17, 2001
485
0
0
Mar 7, 2006
#9
  • Mar 7, 2006
  • #9
You have to drill 2 new holes, and move the MAF bracket down enough to fit. Here is an image.



It will fit if you move the MAF bracket. Or you can cut the MAF bracket at the top, and drill another hole on the braket a little lower, and mount it in the OEM location.
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Mar 7, 2006
#10
  • Mar 7, 2006
  • #10
xpeteyjtx said:
Yea I got the instructions and all that good stuff. I understand that I need to unmount the MAF bracket, BUT, when I attempt to remount the bracket, I won't be able to remount it because the strut tower brace will be in the way. I guess I could create different holes for the bracket, but I don't really feel like doing that, as I will be creating 6 holes already for the brace

This is what I will do...
I will unmount the bracket, install the brace, and then remount the bracket over it. If I cant remount the bracket with both screws, I will just use one... that should be enough.

I'm only making a big deal over this because I would think that MM would slightly modify the brace so that it wouldn't touch the brace. I mean, only a little piece of the brace actually overlaps. Or... maybe there is something wrong with my car

Ok, thanks a lot guys, goodnight
Click to expand...


The bit after step #11 says that you may have to modify some things...... Very little in the performance world is a true "Bolt On".


.
 
X

xpeteyjtx

New Member
Dec 29, 2005
108
0
0
Taunton, MA
Mar 7, 2006
#11
  • Mar 7, 2006
  • #11
Hey criticman, the BBK piece looks better as it doesn't go near the bracket.

Thanks for the reply vristang, I will try to mount the bracket over the brace first and see how that works, then I will enlarge the holes if I have to or move the bracket.

Very little in the performance world is a true "Bolt On
Click to expand...
Soooo true.

****, I forgot to mention that your bay looks awesome, Henceforward. Maybe I will get mine to look that clean soon.

Thanks again.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 8, 2006
#12
  • Mar 8, 2006
  • #12
The MAF bracket is an optional item in my book. Mine's been floating, suspended between the air box ducting and the inlet ducting for over 18 months with no problems.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Mar 8, 2006
#13
  • Mar 8, 2006
  • #13
I am with JRichker on this one. Just unbolt the bracket from the firewall and MAF. Mine [the bracket] is sitting on my self in the garage. The MAF doesn't have to be hard mounted to the car. Plus it makes changing the air filter (or cleaning it) so much easier.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Mar 8, 2006
#14
  • Mar 8, 2006
  • #14
I will take structural integrity over a sheet metal mount anyday. Don't blame MM for that.
Kevin
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Mar 8, 2006
#15
  • Mar 8, 2006
  • #15
I am sporting the floating MAF as well. Just lose the bracket.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 8, 2006
#16
  • Mar 8, 2006
  • #16
wow i havent seen a stock 5.0 intake manifold on top of an engine in a long time...looks good though...i really forgot how cool its look(to me)
stock airbox..radiator fan...damn feel like goin and buyin another 5.0 just to start over again but would save all that stuff nex time
 
You must log in or register to reply here.

Similar threads

Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Salvage/rebuilt title question
  • djj62478
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
218
1996 - 2004 SN95 Mustang -General/Talk- Oct 2, 2026
DadLife0724
Paint and Body Strut tower beginning to break apart, how long do I have ?
  • AnthonyA1234
  • Apr 4, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
2K
Fox 5.0 Mustang Tech Apr 21, 2025
AnthonyA1234
Strut Tower Help!
  • 93Nifty
  • Jan 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
General karthief
T
Missing brace
  • Texas275
  • Feb 6, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
354
1974 - 1978 Mustang II Talk & Tech Feb 7, 2025
extra_stout
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?