Car: 02 S281SC
Ok here is what I think I know:
Stock Boost level: 6psi
Theoretical RWHP: 365 - 15% = 310
Ok so I was planning on adding a Chicane cold air intake, ceramic coated long tube headers, off road X, Chicane intercooler, and a Gords Heat Exchanger.
Now I believe all of these mods will affect boost level, meaning that right now, bone stock I get 6psi out of the m90 SC. However once I do the above stated mods I believe that my boost level will decrease since there will be a lot less back pressure.
So what I was curious about is if I also add a chicane pulley that is normally good for 8 - 10 psi, will that put me back at the stock boost level of 6psi or possibly 7 psi?
If so, then would I still need to have the car tuned and the injectors/ focus fuel pump added? Or would I be able to keep the same Saleen power flash that I currently have since I am basically still at the same boost level?
Also, with the above stated mods w/ pulley what kind of power would I likely see?
Ok here is what I think I know:
Stock Boost level: 6psi
Theoretical RWHP: 365 - 15% = 310
Ok so I was planning on adding a Chicane cold air intake, ceramic coated long tube headers, off road X, Chicane intercooler, and a Gords Heat Exchanger.
Now I believe all of these mods will affect boost level, meaning that right now, bone stock I get 6psi out of the m90 SC. However once I do the above stated mods I believe that my boost level will decrease since there will be a lot less back pressure.
So what I was curious about is if I also add a chicane pulley that is normally good for 8 - 10 psi, will that put me back at the stock boost level of 6psi or possibly 7 psi?
If so, then would I still need to have the car tuned and the injectors/ focus fuel pump added? Or would I be able to keep the same Saleen power flash that I currently have since I am basically still at the same boost level?
Also, with the above stated mods w/ pulley what kind of power would I likely see?