Mods needed

[600hpgt]

What kind of mods would i need to be able to run a edelbrock 750 on my 5.0? i have mods, i just wanted some insight to see if i have enough done. this will be a not daily but often driven car. thanks for the help.

 

[JChalfan]

What kind of mods would i need to be able to run a edelbrock 750 on my 5.0? i have mods, i just wanted some insight to see if i have enough done. this will be a not daily but often driven car. thanks for the help.

Either make a sig with your mods in it, or post them here, so people have an idea of what mods you have already done.

Is your car already carbureted, or are you going to switch from injection to a carb?

 

[600hpgt]

i'm switching from efi to carb., my current list of mods i'll be keeping are probe ind. all forged bottom end, gt40 polished aluminum heads with 1.6 shaft mount rockers, a lunati cam with 498. lift, bbk long tube headers,off road h-pipe, 2 1/2 inch exaust with 2 chambers. i plan on taking the rpm's to around 6500 or so.i also have a tremec 5 speed with 3.73 gears.so with that said,will that support a 750 edelbrock with a dual plane air gap intake?