• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Mods you wish you had not made???

  • Thread starter Thread starter vristang
  • Start date Start date Jun 16, 2005
  • 1
  • 2
  • 3
  • …
  • 6
Next
1 of 6 Next Last

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 16, 2005
#1
  • Jun 16, 2005
  • #1
I saw this posted in the '05 Forum, and thought it was a good question.

goobet
Member


Any Mods Regretted!
Is there any mods you wish you could reverse? (ie) Get your money back because it either didn't work as advertised, or just plain sucked.


I guess I should start things off with one.
My Corbeau seat. The seat is very comfortable, but the fabric was cheap. I wore a hole in it in a matter of months. Definitely not work the $450 to get it.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Jun 16, 2005
#2
  • Jun 16, 2005
  • #2
My shorty headers, waste of time, if I knew at the time I would have done LTs.

My catted X pipe is BY FAR the worst mistake Ive made so far. I took it off and replaced it with an O/R X about 2 weeks ago. What a mistake and waste of 400$.
 
N

NUTCASE

New Member
Mar 31, 2005
187
0
0
Jun 16, 2005
#3
  • Jun 16, 2005
  • #3
actually I have been doing pretty good on the stang except for the motor cracking a piston (201k mile hyper-block) and blowing motors just comes with territory in the modding/racing game.

I think the most bolt-on issues I ever had was with my 89' caprice. in the end that car was pretty fast but it took alot of frustration with tuning and bolt-ons doing nothing until I realized my motors head casting was a junk from the day it was made. once I changed the heads that car moved out.

on that car I went through about $550 in swapping parts and tuning efforts before I realized the heads were about the worst casting GM ever made
 

1BAD93

Founding Member
Oct 29, 2001
93
1
6
Jun 16, 2005
#4
  • Jun 16, 2005
  • #4
I regret my GT-40p's and my B-cam...If i had spent a little more and gone with trick flows and a matching cam i'd be much faster than i am.
 

89CopCoupe

Banned
Feb 17, 2004
606
0
0
Post Count City
Jun 16, 2005
#5
  • Jun 16, 2005
  • #5
This is a good thread topic

GOING CHEAP ... every time I go cheap on buying mods I pay twice over the quality part just to be satisfied

Especially with exhaust headers and mid-pipes ... how many times does someone want to f around with exhaust

However, the UPR stuff I've bought (cheap prices) have all turned out great ... especially the clutch cable which requires a lot less pedal effort than the BBK pos I initially bought.

As comparison, I bought the quality MGW T-5 shifter and knob last week and paid $240 out the door ... I LOVE THIS CNC PIECE!! This thing would make a Pinto feel like a Formula 1
 
S

SamSnyder

New Member
Mar 30, 2005
196
0
0
Jun 16, 2005
#6
  • Jun 16, 2005
  • #6
Gotta have an H-pipe, but the BBK 2.5" cat pipe I bought fit like crap compared to the Steeda I took off that had blown cats. I ended up paying a muffler shop to straighten things out.
 
N

NUTCASE

New Member
Mar 31, 2005
187
0
0
Jun 16, 2005
#7
  • Jun 16, 2005
  • #7
I never had a problem with an h-pipe?????

I got the cheapo summint o/r h and had no problems.

just put it up, tighten all the bolts just enough so it holds itself there, jack it up from the center of the h until it is in position adjusting it as you go up, tigten bolts and presto

only h issues I ever had were rusted out stockers
 

cleanLX

Founding Member
Jan 17, 2001
976
537
144
Jun 16, 2005
#8
  • Jun 16, 2005
  • #8
89CopCoupe said:
GOING CHEAP ... every time I go cheap on buying mods I pay twice over the quality part just to be satisfied
Click to expand...

using the stock oil pump driveshaft.
thinking $300 ported E7's would be as good as E7's from a proven source.
 
B

bcmbcmbcm

20+ Year Stangneter
Jan 29, 2003
455
0
16
Jun 16, 2005
#9
  • Jun 16, 2005
  • #9
Dynomax 'band clamp' WLK-33278

Search Summit with WLK-33278

Sounded like a good idea at the time.. one fell apart so I just welded the pipes. Really pisses me off, not so much the $20 I spent but the time involved.
 

Curse

Member
Apr 8, 2004
791
2
16
El Paso, TX
Jun 16, 2005
#10
  • Jun 16, 2005
  • #10
Porting stock heads!
I should have just bought aluminum heads instead of getting my E7s ported and machined. Car felt good with the ported heads, but I rode in my friend's mustang with AFRs I could have spent a little few hundred more for a lot better performance
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
Jun 16, 2005
#11
  • Jun 16, 2005
  • #11
I don't regret any of the mods I've done because I research the **** out of it before I decide on doing it.
 

1BAD93

Founding Member
Oct 29, 2001
93
1
6
Jun 16, 2005
#12
  • Jun 16, 2005
  • #12
here's another one, i bought a used cobra intake off someone from corral.net and come to findout it had been painted dark gray and was a mess. After the oney i spent to get it sand blasted and powdercoated, i could have had a new one
 

1EVIL88VERT

New Member
Jul 12, 2004
314
0
0
Dyess AFB, TX
Jun 16, 2005
#13
  • Jun 16, 2005
  • #13
the only mod i regret is the 30# injectors.....makes trying to hot start it a pain and always runs rich as hell saving for 24's now....
 

89CopCoupe

Banned
Feb 17, 2004
606
0
0
Post Count City
Jun 16, 2005
#14
  • Jun 16, 2005
  • #14
1EVIL88VERT said:
the only mod i regret is the 30# injectors.....makes trying to hot start it a pain and always runs rich as hell saving for 24's now....
Click to expand...

What is your engine/accessory combo?
 

89CopCoupe

Banned
Feb 17, 2004
606
0
0
Post Count City
Jun 16, 2005
#15
  • Jun 16, 2005
  • #15
maverick0716 said:
I don't regret any of the mods I've done because I research the **** out of it before I decide on doing it.
Click to expand...

You mean you don't regret that Force II catback in your sig
 

huRACEmentPSR

Banned
Apr 2, 2005
101
0
0
San Jose, CA
Jun 16, 2005
#16
  • Jun 16, 2005
  • #16
when i did my 5 lug conversion i bought a complete 98 gt rear end for $300. it is 3/4" wider than a reg fox...so i figured sweet...wider stance. now, with my new wheels/tires the tire hits the fender over almost every bump i go over. i should have just pieced together my own 5 lug disc rear end.
 

bryanrevans

New Member
Sep 10, 2004
296
0
0
Chicopee,Mass
Jun 16, 2005
#17
  • Jun 16, 2005
  • #17
electric fan.........for what??????a new headache?????????????
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
Jun 16, 2005
#18
  • Jun 16, 2005
  • #18
89CopCoupe said:
You mean you don't regret that Force II catback in your sig
Click to expand...

No! lol.....I like the sound of the mufflers.....plus I live in a quiet neighborhood.
 

1EVIL88VERT

New Member
Jul 12, 2004
314
0
0
Dyess AFB, TX
Jun 16, 2005
#19
  • Jun 16, 2005
  • #19
89CopCoupe said:
What is your engine/accessory combo?
Click to expand...
ok the engine mods....10 to 1 compression 302, edelbrock performer rpm heads, lunati bumpstick, ported cobra intake, comp cams 1.6 RR, 70mm TB, 73mm mass air, cold air intake, bbk shortie headers, off road h-pipe, pro dumps, MSD coil, distributor and 6al, deleted EGR, smog pump, a/c, and power steering,electric fan and the 30# injectors.......the dyno numbers are with just the heads and cam and intake, stock everything else in case you wonder why the numbers seem low
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Jun 16, 2005
#20
  • Jun 16, 2005
  • #20
Screams*"i Regret Nothinnnnnngggggg!"
 
  • 1
  • 2
  • 3
  • …
  • 6
Next
1 of 6 Next Last
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Planned Cross Country Run - 65 Fastback
  • Smokinstang65
  • Aug 17, 2021
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2
Replies
23
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Feb 27, 2022
Baron von K 289
B
New Gauges...Accurate? Well Made? Safe?
  • Wayne Waldrep
  • Oct 18, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2019
jrichker
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?