Most of V8 swap complete READ THIS!!

351wcoupe · Mar 8, 2006

After a post a while back I convinced myself of pulling my 351/c4 and sticking a 2.3-5spd back in it.
After a few hours of thinking about it the 351 was sitting on the garage floor. I'm also reworking the body to suit me better as well.

I'm now swapping a high mileage stock long block and back to a T5. A friend and I have only worked on it a few days after work and the body work, wiring and fuel system are done. I'm still waiting on the clutch parts to come before I stick the engine/trans in.

So here's the projected set-up
CAR:
87 coupe tube front suspension/ coilover w/ 100lbs springs
weld in subframes, 8 point cage, gutted fairly seriously, and removed door safety beams.

Powertrain: 88 2.3T with stinger header, holset HX35, external 38mm wastegate, Big NPR cooler, Custom stainless steel intake rotated, supercoupe Tbody, Kirban fuel press. reg., Ranger cam, walbro 255 high press. and an undetermined amount of nitrous. I'll probably start with 70-80 shot and work towards 100 shot.
There are plently of pictures hanging around of the swap efforts if anybody wants to see them.

The worst part is that I made up my mind about this only a few days ago and I'm building it to take to World Ford challenge 9.....May 18.

Its just sleep right?

RustBucket · Mar 8, 2006

It wouldn't feel right if you weren't going to a major event after thrashing for weeks to get something right and spending the night before you left getting everything "good enough" to make the trip.

Anlushac11 · Mar 8, 2006

Nice that you switched to a Ranger roller cam but with your setup you really need a good cam wiht a profile intended for a turbo motor. That would probably give you a significant boost in power.

Your setup does sound pretty sweet.

Red_LX · Mar 8, 2006

Matt, you always seem to be involved in some sort of thrash-fest in the month or two before WFC

SVO1 · Mar 8, 2006

Sleep is for the dead!
Sounds fun. I already know I will not be racing this year, but I am thrashing to Just get the car done to have it there!
Mostly bare metal, No front suspension, rear end still broke (from it's wheels up launch in 03) and abunch of goodies laying around.
Sounds like we are pretty much in the same boat.
and IIRC you are also planning a wedding this year correct? (July 8th here)

351wcoupe · Mar 8, 2006

Yeah I'm not sure what it is that makes me think of the Better Ideas" as late as I do.
Honestly I have my plan for WFC10 and I have promised myself that after this year I'll have my vehicles ready one year in advance.

As the events unfolded last year I broke this car about 12 hours before I was supposed to leave for St Louis. I also intend to break it much sooner this time.

anlushac: I've taken into consideration the cams but everything listed I have laying around that was intended for the pinto. I'll throw a cam gear at it to make up for the lack of rpm range.

RED: Will you be joining the thrash this year? Is you're car going? If not figure on spending your weekends here for a little while.

SVO1: Good luck with yours.
I realize how lucky I am to have a fiance that has allowed me to put off the wedding to go back to the race that I proposed at.

To anybody who plans to go to WFC this year: I am waiting on a 38' enclosed trailer that I ordered. Which means, Red if your car is ready and you will split the fuel we can tow your car too. Also, for people who are planning to go, this trailer will have A/C and will be a rolling party.

Red_LX · Mar 9, 2006

Yes I will be joining the "thrash" this year, to have my car ready, although I don't think it will be too much of a thrash since I really have about 2 months to get maybe 3 or 4 things done that I NEED to get done. My TC will definitely be there although I won't be racing. Don't worry about a tow, I'll be driving it out. Wouldn't want to make you guys take such a detour anyway.

Sounds like I'll have to swing by your spot in the pits

mr_woodster · Mar 9, 2006

Ah, i havent posted in a few months. Good to know your still crazy as usual 351w

351wcoupe · Mar 9, 2006

Red I was talking about you meeting here...I'll be stressed enough right up to the point where we leave anyway. After that its too late to worry. Well if you have any big items or tools that you don't want to drag along the offer is still there.

woodster: um...yeah. I do have a pile of fun though.

I'm still considering the possibility of building a 2nd for amanda to run. She has a 63 falcon stationwagon that I am going to put the 351w in. At the rate I'm getting the black car done, I might pull it off.

SVO1 · Mar 9, 2006

Good Luck Matt!
Too bad you are not coming thru Iowa, My buddy is trying to find an enclosed trialer for his 1400 mile 88 TC to bring to WF.

Red_LX · Mar 9, 2006

Meet up in VA? Nah, that'd be a hundred or so miles in the wrong direction

I should be ok. The bird has a huge trunk

TurboFlush · Mar 10, 2006

351 at it again.

:SNSign:

351wcoupe · Mar 11, 2006

I still can't believe I've pulled this out.

Here's the suitable 260k mile stock 88 TC engine

This used to be a decent car.

351wcoupe · Mar 11, 2006

Also I am in serious need of stock replacement fiberglass fenders. Does anybody know of a reasonable place I can get them? All I keep finding is the Z3 style fenders.

351wcoupe · Mar 12, 2006

Ok its been a long busy weekend but I have certainly made a little progress. I still have to do the final on everything but it is coming along nicely.

Asha'man · Mar 18, 2006

Wish I was going this year to check it out. Looks like fun!

Brian

351wcoupe · Mar 18, 2006

you're the second one thats said that today.

You might as well figure out a way to get there, it won't be the same just "reading" about me blowing something apart.

misslightning · Mar 22, 2006

351wcoupe said:
.

SVO1: Good luck with yours.
I realize how lucky I am to have a fiance that has allowed me to put off the wedding to go back to the race that I proposed at.
i guess thats why you love me as much as you do

93lx23 · Mar 28, 2006

Can i have the 351w

351wcoupe · Mar 30, 2006

you don't want it its a pile of crap.

Most of V8 swap complete READ THIS!!

New Member

New Member

I’m not much help unless you’re looking for ****!

Lord of The somethin' somethin' somethin', hell, I

New Member

I’m not much help unless you’re looking for ****!

Active Member

New Member

Lord of The somethin' somethin' somethin', hell, I

I’m not much help unless you’re looking for ****!

New Member

Attachments

New Member

New Member

Attachments

New Member

Does this truck make my butt look big?

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency