Motor build.

YawnY

New Member
Sep 12, 2008
42
0
0
Just looking for advice and some ideas here.

So I own an 86 mustang with a 93 fuel injection 5.0 yesterday I pulled the motor to do some work.

Now heres some of my idea's.

Bore the engine .30 over, heads, cam, lower/upper intake, rockers lifters and pushrods and possible nitrous.

Now there are so many different options for parts out there and I really cant decide on what I want. I'm not looking to spend anymore then 2 or 3 grand on this build.
I dont have much experience working on the 302 as every build i've done has been on a dsm. So what parts work well with this motor and what should I stay away from?

Any thoughts or oppions would be greatly appreciated.
 
since your on a budget i'd go with some patriot heads. which are good aluminum heads for the price. as far as intakes go with either edelbrock rpm2 or holley systemax. for cam we'd ahve to know more about your goals. somthing as simple as a trickflow stage 1 would work or even a custom made jay allen cam. so who knows. get a cam that works well in the rpm range of the intake you go with. as far as pushrods/rockers any name brand is pretty good. i've got comp roller rockers and trickflow pushrods with no problems.
 
Patriot heads sell for about $935-1000, if your gonna spend that you might as well spend another $200 and get a set of Trick Flows, I would think anyways. AFR and Trick Flow seem to be the best heads for the 302. Plus if you do a search on the patriot heads a lot of people find there valvetrain questionable. I would be ready to spend more around the $3000 range. Once you buy heads, an intake and forged pistons you'll be at the $2000 mark, unless you buy used, and if your gonna run nitrous you'll need forged pistons.