Seeking advice and suggestions from the pros.
I have a 2000 Gt which i am pulling the motor out and going to rebuild my motor. Keep in mind this will be my first actual motor pull and build i do myself. I believe i bent a rod but not 100% sure yet until we pull the motor out. First things first i would like suggestions on easiest way to pull the motor out. Secondly i would like recommentions on parts and setups within the price range i am working with. Budget is about 4000. As long as my block and heads are still good im looking into have my shock block rebuild with stock parts, getting Hitech Stage 2 cams, valvesprings, Mac longtubes with Mac O/R H-pipe, Accufab TB & Plenum combo (70mm or 75mm). I already have underdrive pulleys, JLT CAI, programmer, and i beleive the car came with 4.10 gears. My goal is with that budget and those parts plus any other suggestions or what not to reach a goal of about 300-325 HP. Im all ears fellas....
I have a 2000 Gt which i am pulling the motor out and going to rebuild my motor. Keep in mind this will be my first actual motor pull and build i do myself. I believe i bent a rod but not 100% sure yet until we pull the motor out. First things first i would like suggestions on easiest way to pull the motor out. Secondly i would like recommentions on parts and setups within the price range i am working with. Budget is about 4000. As long as my block and heads are still good im looking into have my shock block rebuild with stock parts, getting Hitech Stage 2 cams, valvesprings, Mac longtubes with Mac O/R H-pipe, Accufab TB & Plenum combo (70mm or 75mm). I already have underdrive pulleys, JLT CAI, programmer, and i beleive the car came with 4.10 gears. My goal is with that budget and those parts plus any other suggestions or what not to reach a goal of about 300-325 HP. Im all ears fellas....