• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Motor Free Spinning??

  • Thread starter Thread starter brent_cosenza
  • Start date Start date Mar 11, 2007
Status
Not open for further replies.
  • 1
  • 2
Next
1 of 2 Next Last

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Mar 11, 2007
#1
  • Mar 11, 2007
  • #1
What would cause my motor to free spin all you can hear is the starter and the engine rotates but no huffing or trying to crank can anyone help me..
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Mar 11, 2007
#2
  • Mar 11, 2007
  • #2
my first thought would be look at your fuel sources
 

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Mar 11, 2007
#3
  • Mar 11, 2007
  • #3
fuel is good fuel pump is good...injectors are pumping
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Mar 11, 2007
#4
  • Mar 11, 2007
  • #4
brent_cosenza said:
fuel is good fuel pump is good...injectors are pumping
Click to expand...

how do you know that the pump is good? & also have you changed your filter?
 

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Mar 11, 2007
#5
  • Mar 11, 2007
  • #5
when i turn the key on i hear it click but i will check it and my fuel filter do you think there is anything else it could be...
 

fast97gt

Active Member
Jan 2, 2007
1,082
2
49
north carolina
Mar 11, 2007
#6
  • Mar 11, 2007
  • #6
sounds like to me you got big probs if you dont hear "huffing" or the compression strokes
 

4.6andSlicks

New Member
Aug 22, 2006
171
1
0
Central Connecticut
Mar 11, 2007
#7
  • Mar 11, 2007
  • #7
If you're not hearing a compression stroke, sounds like cam timing is way off. I would think if the chain broke you would hear a couple of compression strokes due to the valves being closed all the time on at least a couple of cylinders.

You didn't just assemble this engine, did you? I knew a guy that just assembled the timing chain and cams with no regard to timing marks and had the same thing happen.
 

Nathen4.6

New Member
Mar 1, 2007
34
0
0
Central Florida (352)
Mar 11, 2007
#8
  • Mar 11, 2007
  • #8
when the timing belt snapped on my audi it did the same thing. it is no longer with us.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Mar 11, 2007
#9
  • Mar 11, 2007
  • #9
I am still thinking a problem with your UDP's...

it may also now freewheel due to fuel washing down the rings. this can lower the compression enough to make it sound like this.

first your going to need to figure out why it's not starting.. if you have spark and fuel presure then pull out the plugs and clean them well and if the oil smells like gas then change the oil and try again.
 
C

Craiger77

Member
Feb 16, 2002
32
0
7
MD
Mar 12, 2007
#10
  • Mar 12, 2007
  • #10
brent_cosenza said:
when i turn the key on i hear it click but i will check it and my fuel filter do you think there is anything else it could be...
Click to expand...



I'm confused... Are you saying that when the key is turned you only hear it "clicking". Is the motor actually turning over? (if it's not, thats why you aren't hearing any compression)
Maybe I'm way off but i'm thinking it could be a dying battery or bad starter?
 
N

n0v8or

10 Year Member
Aug 23, 2003
604
8
39
Rhode Island
Mar 12, 2007
#11
  • Mar 12, 2007
  • #11
I'm with Craiger77. Are you really saying that the starter is spinning but the engine is not? (starter drive failure)
 

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Mar 12, 2007
#12
  • Mar 12, 2007
  • #12
OK I was talking about the fuel pump clicking on and the engine spinning no huffing the timing chains are tight not loose at all I took the valve covers off I dont know how it could have Jumped time or even if it did but when I was driving it and gave it some gas it bogged out and started doing this...I just went and checked and its getting plenty of fuel it squirted to the top of my hood as far as spark how do i check that?
 

4.6andSlicks

New Member
Aug 22, 2006
171
1
0
Central Connecticut
Mar 12, 2007
#13
  • Mar 12, 2007
  • #13
brent_cosenza said:
OK I was talking about the fuel pump clicking on and the engine spinning no huffing the timing chains are tight not loose at all I took the valve covers off I dont know how it could have Jumped time or even if it did but when I was driving it and gave it some gas it bogged out and started doing this...I just went and checked and its getting plenty of fuel it squirted to the top of my hood as far as spark how do i check that?
Click to expand...

When you had the valve covers off, did you crank the engine and were the cams spinning? Any backfires when attempting to start it? I'm sticking with cam timing. If you have the covers off, bring it around to top dead center on number one cylinder and both valves should be closed. If they're not, somehow you jumped time. I've never had the chain covers off my engine. Is there a keyway on the crank pulleys that could have broke?
 

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Mar 13, 2007
#14
  • Mar 13, 2007
  • #14
4.6andSlicks said:
When you had the valve covers off, did you crank the engine and were the cams spinning? Any backfires when attempting to start it? I'm sticking with cam timing. If you have the covers off, bring it around to top dead center on number one cylinder and both valves should be closed. If they're not, somehow you jumped time. I've never had the chain covers off my engine. Is there a keyway on the crank pulleys that could have broke?
Click to expand...

I dont know what you mean by keyway please explain if you are talking about that little slot i'm guessing its not broke I dont have the belt on and its turning the crank by itself but no huffing and the cams did move and it lightly backfired where the Hpipe is not out the tailpipes
 

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Mar 13, 2007
#15
  • Mar 13, 2007
  • #15
anyone got anymore ideas?
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Mar 13, 2007
#16
  • Mar 13, 2007
  • #16
brent_cosenza said:
anyone got anymore ideas?
Click to expand...

yeah check your crank trigger wheel and crankshaft position sensor.. check to see if you have spark and then if you do remove the plugs and clean them well, this will also give a flooded engine time to dry out, then change the oil and try again.
 

4.6andSlicks

New Member
Aug 22, 2006
171
1
0
Central Connecticut
Apr 15, 2007
#17
  • Apr 15, 2007
  • #17
So do we know what caused this? I'm curious !!!
 

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Apr 16, 2007
#18
  • Apr 16, 2007
  • #18
nope still isnt fixed yet...timing is correct i have no spark and i have compression andeverything is in excellent condition as fars as internals go so i have no clue...can anyone help me figure this out
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 16, 2007
#19
  • Apr 16, 2007
  • #19
you have no spark?

Do you have underdrive pulleys on the car, if so then check the crank pulley and triggerwheel
 

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
Apr 16, 2007
#20
  • Apr 16, 2007
  • #20
svttech yeah i have UDP's and the crank pulley and trigger wheel is fine. I have pulled the timing chain cover and the valve covers off to check everything and everything is fine I just cant figure this out..
 
  • 1
  • 2
Next
1 of 2 Next Last
Status
Not open for further replies.

Similar threads

M
2001 cobra ignition timing off
  • Mike3
  • Jul 13, 2026
  • SVT Tech Forum
Replies
9
Views
410
SVT Tech Forum Aug 2, 2026
Mike3
M
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
270
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
769
Other Auto Tech Jul 13, 2026
General karthief
M
2004 v8 convertible
  • Mikeycrownvicluver
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
585
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
Mikeycrownvicluver
M
D
4.6L 4v motor swap
  • DangStitches
  • Jul 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
194
1996 - 2004 SN95 Mustang -General/Talk- Jul 29, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?