Motor Mount Help

[Khyron]

This weekend I will be installing some new Prothane Motor Mounts and just wanted to know if there are any tips you guys could share to make it easier. I haven't found any write-ups online regarding this change. I'd greatly appreciate any insight from those of you who have done this, and especially any photos! Thanks!

 

[Jenns01TA]

Hey Khyron,

I sent a PM to a member who has installed the Prothane MM. Hopefully he'll either PM you or post some help in here.

Jenn

 

[Khyron]

Hey Khyron,

I sent a PM to a member who has installed the Prothane MM. Hopefully he'll either PM you or post some help in here.

Jenn

Thanks Jenn. I hope to hear from him.

 

[Jenns01TA]

You bet. I'll poke around the web in the meantime and see if I can find anything.

I do recall Anthony saying that the install took him a couple of hours (I would rate his skill set Advanced in terms of modifications so an intermediate gear head would take about 4-6 hours to do the swap. Most sites say 1-2 with standard hand tools, but if it took Anthony a couple hours it makes me wonder if the 1-2 is a correct estimate.) He also indicated that the passenger side swap required removing the aluminum motor to body bracket.

Let me see if I can find anything that may help ya'.

 

[anthony05gt]

I posted over on the tech side. I'd say an average back yard mechanic can do it in a few hours as long as he or she isn't really inexperienced.