motor mount swap

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Anyone have any tips on swapping out motor mounts without an engine lift??? Its about 15* out now and I really don't feel like laying under the car trying to figure it out

Posted via Mobile Device
 
Well the motor mounts are sandwhich in between the kmember and engine so how are you going to get them out without lifting the engine? You can raise the engine with a jack from the oil pan and that will give you plenty of clearance to take out the mounts, but you will need to get on your back to unbolt the mounts.
 
I know how they are in just not thinking lifting on the pan would be a good idea... Think I'm going to break the nuts loose and make some lifting blocks ar work so I can jack on the pan rails and not the pan itslef.
Posted via Mobile Device
 
That's a lot of extra work and there's not the much lip to lift on on the rail, doesnt seem very safe. Just put a piece of wood in between the pan and jack. Thats how everyone does it I dont think any one has ever hurt their pan doing it that way, I know it worked perfect for me. Like said above, it should take less than an hour.