• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Motor mount...

  • Thread starter Thread starter RsStanG1987
  • Start date Start date Feb 11, 2006

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 11, 2006
#1
  • Feb 11, 2006
  • #1
Can i change it with the engine still in the car...
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Feb 11, 2006
#2
  • Feb 11, 2006
  • #2
Yeah you can you need to diconnect them and jack your oil pan up with a 4x4 or 2x4 piece of wood. Make sure you put them on the right sides they are side dependent.
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 11, 2006
#3
  • Feb 11, 2006
  • #3
So I dont need a cherry picker to do this project?
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Feb 11, 2006
#4
  • Feb 11, 2006
  • #4
Nope just some jack stands, and a jack.
 

CarFreakGT

20+ Year Stangneter
May 26, 2003
395
11
29
Louisville, KY
Feb 11, 2006
#5
  • Feb 11, 2006
  • #5
TrophyHead said:
Yeah you can you need to diconnect them and jack your oil pan up with a 4x4 or 2x4 piece of wood. Make sure you put them on the right sides they are side dependent.
Click to expand...

So, you put the wood directly under the oil pan? It won't damage the pan?
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Feb 11, 2006
#6
  • Feb 11, 2006
  • #6
CarFreakGT said:
So, you put the wood directly under the oil pan? It won't damage the pan?
Click to expand...

Mine didn't.....if you put the block of wood vertically it might.

I wonder if anybody else did it this way?
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 11, 2006
#7
  • Feb 11, 2006
  • #7
how long did it take?
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Feb 11, 2006
#8
  • Feb 11, 2006
  • #8
I would give yourself at most 2 hours.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Feb 11, 2006
#9
  • Feb 11, 2006
  • #9
i herd of doing it that way... didnt have a problem... i wanna do mine too..
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 11, 2006
#10
  • Feb 11, 2006
  • #10
Jaswir said:
i herd of doing it that way... didnt have a problem... i wanna do mine too..
Click to expand...
good when you wanna do yours let me know i wanna see how it goes.. I might do mine this week...
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 11, 2006
#11
  • Feb 11, 2006
  • #11
Also do i have to loosen both mounts only one of mine is bad?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 11, 2006
#12
  • Feb 11, 2006
  • #12
are u replacing with polly mounts.
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 11, 2006
#13
  • Feb 11, 2006
  • #13
Roland69 said:
are u replacing with polly mounts.
Click to expand...
Just stock replacement for now because they are free from autozonne
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 11, 2006
#14
  • Feb 11, 2006
  • #14
Jrichker has a nifty write up on doing it.

Make sure that the new mounts' fasteners will accept the stock nuts. Sometimes they change from SAE to metric on parts store mounts. Also I would use vert mounts (ask for any 87-93 vert mount, or any mount for a 93, since Ford switched to the vert captured mount by 93 for all foxes).

You could put an auxillary jack under the bell housing to relieve some stress on the oil pan.

Good luck.
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Feb 11, 2006
#15
  • Feb 11, 2006
  • #15
link to the write up?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 11, 2006
#16
  • Feb 11, 2006
  • #16
Might have to do it yourself (you probably came across his post while searching about motor mounts before starting the thread anyhow).

I am on dial-up and this site is loading really slow (too slow for me to hunt through threads).

Good luck.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Feb 12, 2006
#17
  • Feb 12, 2006
  • #17
Well if you do yours let me know more then likely it will be more then a week before i do mine... i will help you out because i wanna see how it goes...
 
You must log in or register to reply here.

Similar threads

Engine Would you replace these OEM motor mounts?
  • 91GTstroked
  • Sep 21, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
410
Fox 5.0 Mustang Tech Oct 11, 2026
Potomus Pete
Motor mounts question
  • djj62478
  • Mar 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
773
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 13, 2026
nickyb
T
Fox *Solved* Motor mount bolt question
  • TDM389
  • Mar 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
375
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 22, 2026
TDM389
T
Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
171
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
275
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?