Ok as it stands now, i have my 3.90 rearend.
Picking up t5 swap parts tommorrow....
and i will have about 450$ in the bank
Should i get a rearend bushing kit??
I also need to rebuild my motor too.
We will probably rebuild the motor, swap the tranny, and swap rearends all at the same time, should be easier.
how much should a nice solid rebuild cost me??
My longblock i have is a 93, i can get a hold of an 87 camshaft, i am told they are a more agressive cam than the 89 -93 cams
Or i was thinking a b cam.... the motor will be stock for the most part so i dont know.
I think a b cam with 1.7RRs and those 3.90s it would pull pretty damn hard in the upper RPMs.
But the 87 cam with 1.7RRs would be nice wouldnt it, and i would save some money. I would get the 87 cam for free and just need to buy RRs, if i got the bcam, i would be buying the cam and the rockers.
So
bcam + 1.7s
or
87 cam + 1.7s??
Also i should be getting 8 used pistons from a friend. So say i buy the 180$ federal mogul rebuild kit, how much more money should i expect to spend on the rebuild??? besides machined block and heads...
Picking up t5 swap parts tommorrow....
and i will have about 450$ in the bank
Should i get a rearend bushing kit??
I also need to rebuild my motor too.
We will probably rebuild the motor, swap the tranny, and swap rearends all at the same time, should be easier.
how much should a nice solid rebuild cost me??
My longblock i have is a 93, i can get a hold of an 87 camshaft, i am told they are a more agressive cam than the 89 -93 cams
Or i was thinking a b cam.... the motor will be stock for the most part so i dont know.
I think a b cam with 1.7RRs and those 3.90s it would pull pretty damn hard in the upper RPMs.
But the 87 cam with 1.7RRs would be nice wouldnt it, and i would save some money. I would get the 87 cam for free and just need to buy RRs, if i got the bcam, i would be buying the cam and the rockers.
So
bcam + 1.7s
or
87 cam + 1.7s??
Also i should be getting 8 used pistons from a friend. So say i buy the 180$ federal mogul rebuild kit, how much more money should i expect to spend on the rebuild??? besides machined block and heads...