I am about to put together my first motor, but i have a few questions;
1. I plan on running a MMR 600 short block with stock heads and Hitech stage 2 cams with springs. My question is how much compression or lack of dish can i run with these cams and not run into PTV issues?
2. Do i need to larger injectors and fuel pump with this setup? I currently am running a stock 01 Gt setup. If so how big, I can get a hold of a 04 cobra maf and Injectors for cheap if need be.
3. I am stationed in the U.K. so where could i get a good email tune get the car running safely? Even if i get it dynoed i would have to email the data most likely and request a tune based off the data.
4. Will i have a problem with the hitech cams and emission? All they test for is Carbon Dioxide emission, I don't know if this makes a difference or not. Thanks.
1. I plan on running a MMR 600 short block with stock heads and Hitech stage 2 cams with springs. My question is how much compression or lack of dish can i run with these cams and not run into PTV issues?
2. Do i need to larger injectors and fuel pump with this setup? I currently am running a stock 01 Gt setup. If so how big, I can get a hold of a 04 cobra maf and Injectors for cheap if need be.
3. I am stationed in the U.K. so where could i get a good email tune get the car running safely? Even if i get it dynoed i would have to email the data most likely and request a tune based off the data.
4. Will i have a problem with the hitech cams and emission? All they test for is Carbon Dioxide emission, I don't know if this makes a difference or not. Thanks.