• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

Motor Trend's predictions for the next gen Stang

  • Thread starter Thread starter Mossberg
  • Start date Start date May 31, 2004
Prev
  • 1
  • 2
First Prev 2 of 2

average guy

New Member
Mar 22, 2003
38
0
0
new jersey
Jun 1, 2004
#21
  • Jun 1, 2004
  • #21
Wylde said:
. c) I think the 05 look freaken awesome, it's best job I have ever seen to make a car use some styling cues of the days when all cars looked different and yet modern. I am so sick of "cookie cutter" car designs, so many cars can be mistaken for so many other cars, and even manufacturer from 1000 yards, it's discusting. The 05 Mustang will be without a doubt unmistakenably MUSTANG from any distance.

Motor Trends concept drawing looked good but I am glad the design went into the direction that it did instead.
Click to expand...

here here...look at the gto, cookie cutter design all the way...as for you saying 40 is not old i agree and I'm only 23. But i must admit, when u rambling on about how it not fair to say 40 is old , i did picture you where in your beach chair, sitting outside watching cars go while shaking you finger vigoursly and make the sound heeebeeeebeeeebeeeee
 
B

Bizzatch

New Member
May 27, 2004
11
0
0
Jun 1, 2004
#22
  • Jun 1, 2004
  • #22
SVTJayC said:
Anyone else wish that was accurate?
Click to expand...
I do that **** looks hard,

the new retro boxed out look sucks.

I especially hate the interior (dash) and uncomfortable looking pos seating.
 
J

Jugg2Driver

New Member
Dec 15, 2003
45
0
0
Jun 1, 2004
#23
  • Jun 1, 2004
  • #23
Anybody notice those drawing show the mustang with 4 exhaust outlets, two out the back and two out the side!
 
S

SVTJayC

New Member
Jan 13, 2004
47
0
0
Jun 1, 2004
#24
  • Jun 1, 2004
  • #24
Yeah, we all noticed, about 5 posts up...read much?
 
O

Omegalock

New Member
Aug 31, 2003
616
0
0
Jun 1, 2004
#25
  • Jun 1, 2004
  • #25
SVTJayC said:
Anyone else wish that was accurate?
Click to expand...
I think that thing is fugly.
 
G

galli2006

New Member
May 31, 2004
4
0
0
Jun 1, 2004
#26
  • Jun 1, 2004
  • #26
Is it just me or does that back end look like a Saturn?
 

351CJ

New Member
Dec 11, 2002
1,732
1
0
Jun 1, 2004
#27
  • Jun 1, 2004
  • #27
WaltA said:
An interesting side note, is that the production 2005 Mustang is actually more Asian. The head of the S197 Mustang design project, was born and raised in Vietnam.

So, he actually brought to the design, his own outsider impressions of what an "American" sports car should be.
Click to expand...

I guess it depends on what your definition of what an American is. Thai-Tang arrived in the US in 1975 when he was 9 years old and has been in the US for 29 years, over 3 times as many years as he spent in Vietnam.

Edit: Just saw your post Shatner, looks like we agree again.

Don't mean to rag on you Walt but your whole statement is kind of stupid as there were hundreds of people involved in the design and developlent of the Mustang.

Thai-Tang is the Chief Engineer, he was not the stylist. There were a couple articles about who actually styled the exterior. Someone who has more energy can search for a link, but IIRC the primary exterior stylist was some hot rodder who grew up in California.
 

Mossberg

Active Member
Jul 21, 2003
0
1
36
ATL, Shawty
Jun 1, 2004
#28
  • Jun 1, 2004
  • #28
Wouldn't it be cool if they built both Mustangs!

The current production design (05) would be dubbed the Mustang Heritage model. And the Motor Trend concept would be the New Mustang.

One draws from the style of the old Stangs and one moves to the new age with new technology and gadgets.

But of course it would probably make no economic sense whatsoever. I think I just like the idea of having as many Stang choices as possible to collect for my garage.

(Mossberg will now step away from teh crack pipe!)
 
S

shatner saves

New Member
Jan 13, 2004
583
0
0
Jun 1, 2004
#29
  • Jun 1, 2004
  • #29
351CJ said:
...the primary exterior stylist was some hot rodder who grew up in California.
Click to expand...

That was Ford Chief Designer Larry Erickson. He also did the styling on "Cadzilla" for ZZ Top. I don't know if he was primarily responsible for the concept or production car. Ultimately, he reports to Jay Mays.

Edit: according to a Motor Trend article, the California design studio under Richard Hutting did the concepts cars and Erickson's team in Detroit did the production version.
 
R

redfireGT

New Member
May 23, 2004
10
0
0
Jun 1, 2004
#30
  • Jun 1, 2004
  • #30
shatner saves said:
That was Ford Chief Designer Larry Erickson. He also did the styling on "Cadzilla" for ZZ Top. I don't know if he was primarily responsible for the concept or production car. Ultimately, he reports to Jay Mays.

Edit: according to a Motor Trend article, the California design studio under Richard Hutting did the concepts cars and Erickson's team in Detroit did the production version.
Click to expand...

You are absolutely right. The styling of the car was done by Erickson and Mays. The Chief Engineer's role is to engineer the car.... not to style it.

Thai-Tang's upbringing is an nice heartwarming story and Ford has gotten a lot of mileage out of it but I doubt if it played any role in him getting the job.

What's more relevant is his experience on last major RWD platform (DEW98) and the fact that he was the Vehicle Engineering manager on Mustang during the Bullitt and Mach 1 development.

From what I read, the guy is pretty sharp. Newman-Haas won the Championship when he was there and bombed the next year when he left. He also won an award from the Automotive Hall of Fame. Read this quote from an automotive journalist on the LS media drive: http://www.theautochannel.com/content/vehicles/new/reviews/2000/afrankl_lincoln.html
 
9

92Frankenstein

New Member
Apr 25, 2004
223
0
0
Minnesota
Jun 1, 2004
#31
  • Jun 1, 2004
  • #31
It looks like an Intrepid. Are you sure that wasnt theintrepid concept....
 
S

shatner saves

New Member
Jan 13, 2004
583
0
0
Jun 1, 2004
#32
  • Jun 1, 2004
  • #32
redfireGT said:
You are absolutely right. The styling of the car was done by Erickson and Mays. The Chief Engineer's role is to engineer the car.... not to style it.

Thai-Tang's upbringing is an nice heartwarming story and Ford has gotten a lot of mileage out of it but I doubt if it played any role in him getting the job.

What's more relevant is his experience on last major RWD platform (DEW98) and the fact that he was the Vehicle Engineering manager on Mustang during the Bullitt and Mach 1 development.

From what I read, the guy is pretty sharp. Newman-Haas won the Championship when he was there and bombed the next year when he left. He also won an award from the Automotive Hall of Fame. Read this quote from an automotive journalist on the LS media drive: http://www.theautochannel.com/content/vehicles/new/reviews/2000/afrankl_lincoln.html
Click to expand...

It warms my heart to think the guy that had a hand in Nigel Mansell's CART championship is building my next car.
 
H

Hellmurder

New Member
Feb 20, 2004
6
0
0
Jun 2, 2004
#33
  • Jun 2, 2004
  • #33
That car looks like it could compete with the GTO.

And, it looks like it has 4 exhaust tips. Two in the back, and it looks like it has side exhausts too.
 
F

frankswildyears

New Member
May 20, 2004
40
0
0
Jun 3, 2004
#34
  • Jun 3, 2004
  • #34
if the 2005 looked like that i would have bought my dream car (68gt390) four months ago. I love the 2005 and already have my order in. As per engineering, for those of you who dont know, the retro muscle car war has been started by the 2005 stang (i dont consider new gto a muscle car) but DAimler-chrysler dodge has something coming soon(retro) that matches the stangs retro look and out performs her (straightline anyway). With gas prices rising and the return of american performance cars it going to be a great (or painfull) display of how much we like speed here in north america.
 

Wylde

New Member
Jan 16, 2004
225
0
0
Edmonton, AB, Canada
Jun 3, 2004
#35
  • Jun 3, 2004
  • #35
maybe I will buy a "Smart" car instead of the 05 Mustang, 700cc of pure nothing but gas miser .....













NOT
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

O
My rebirth, Hi from PA
  • onemore1987
  • Jun 28, 2026
  • The Welcome Wagon
Replies
3
Views
127
The Welcome Wagon Jun 29, 2026
onemore1987
O
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
606
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
427
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
204
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
T
What's it Worth? 2002 GT conv/auto
  • tonydetesta
  • Jan 7, 2026
  • What is it Worth?!?!?
Replies
3
Views
648
What is it Worth?!?!? Jan 21, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?