• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Motor Trouble??

  • Thread starter Thread starter mustangderek22
  • Start date Start date Jun 24, 2007
M

mustangderek22

New Member
Nov 16, 2005
40
0
0
New Ringgold PA
Jun 24, 2007
#1
  • Jun 24, 2007
  • #1
I put a new crate motor in the mustang it`s the gt-40 ford racing motor. Look at my signature to see whats all on the motor.....My problem is when I`m crusing around it lower rpms its very jerky...sometimes it`s really bad...I've noticed its always jerky when the rpms are lower then 2000 anything above that it drives good...I have no idea whats causeing this to happen?? any help please
 

BigHairyMonkey

Founding Member
Jun 18, 2003
411
1
16
Houston (Bellaire) TX
Jun 24, 2007
#2
  • Jun 24, 2007
  • #2
1. pull the codes. 2. check for vacuum leaks. 3. check your fuel pressure 4. check your timing
 
M

mustangderek22

New Member
Nov 16, 2005
40
0
0
New Ringgold PA
Jun 24, 2007
#3
  • Jun 24, 2007
  • #3
I know the timing is in ....when i got it dynoed they checked it....i think its at 14 advanced and i have messed with the fuel pressure and it get better when i put it around 50 but still isn`t right....it almost seems like it isn`t getting enough fuel...but I don`t know..i`m at a loss
 
M

mustangderek22

New Member
Nov 16, 2005
40
0
0
New Ringgold PA
Jun 24, 2007
#4
  • Jun 24, 2007
  • #4
and I`m pretty positive there are no vaccume leaks...I don`t hear any and from what i`ve checked there all hooked up right
 

BigHairyMonkey

Founding Member
Jun 18, 2003
411
1
16
Houston (Bellaire) TX
Jun 24, 2007
#5
  • Jun 24, 2007
  • #5
no way to really know for sure unless you hook up a vac guage. pull the codes
 
M

mustangderek22

New Member
Nov 16, 2005
40
0
0
New Ringgold PA
Jun 24, 2007
#6
  • Jun 24, 2007
  • #6
ok....where can you get one of those?
 

BigHairyMonkey

Founding Member
Jun 18, 2003
411
1
16
Houston (Bellaire) TX
Jun 24, 2007
#7
  • Jun 24, 2007
  • #7
most autoparts stores, call around or stop by a shop with some convincing they might just let you borrow one for an hour. Also a code puller can be had at the same shops for like 30 bucks (OBD I)
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 25, 2007
#8
  • Jun 25, 2007
  • #8
Spend 2 cents for a paper clip and you can dump the codes...

Dump the codes and see what the computer says is wrong…Codes may be present in the computer even if the Check Engine light isn’t on.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.
See http://www.troublecodes.net/Ford/





IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is less than $30 or so at AutoZone or Wal-Mart.

Or for a nicer scanner see http://www.midwayautosupply.com/p-7208-equus-digital-ford-code-reader-3145.aspx– It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.


If you are having surging idle problems or no idle at all, see "Help me create the Surging Idle Checklist" at http://forums.stangnet.com/showthread.php?t=698148
for help with your idle problems. The first two posts contain all the updates to the fixes. I continue to update it as more people post fixes or ask questions.

All of the info in there is good to apply to low speed problems too.
 
You must log in or register to reply here.

Similar threads

8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
356
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
I
98 Mustang GT dying
  • ItsMason
  • May 14, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
246
1996 - 2004 SN95 Mustang -General/Talk- Jun 25, 2026
lenzgt
L
R
Mustang mk6 v6 strange leak
  • reme24
  • Mar 18, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
386
2015 - 2023 (S550) Mustang -General/Talk Mar 26, 2025
89ripper
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
909
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?