MS3PRO PNP A/C Idle Up Setup

Xethln

New Member
Dec 4, 2016
1
0
1
Good Afternoon, I have a 03 Mach 1, my stock computer went out and I replaced it with a 99-04 Mustang MS3Pro PNP, my problem is the MS3 is not activating my AC, does anyone know what the idle-up input and output should be? Right now the are set to
Idle-Up Output: PWM Out 3
Idle-Up Input: Digital Switched in 3
Any help would be greatly appreciated, thanks in advance.
 
  • Sponsors (?)


That information is provided in the pin out available on the diy website. And likely in the usb stick you were provided with upon purchase.

Apost your tune and a datalog the car running while you cycle the ac switch.