• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

MSD boxes messing up timing light readings

  • Thread starter Thread starter Black1987Stang
  • Start date Start date Jan 10, 2008

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 10, 2008
#1
  • Jan 10, 2008
  • #1
Anybody ever have timing light problems with their MSD boxes? I found a thread how the fancier timing lights with built in tachs and advance gets confused readings from the capacitive discharge and the multiple sparks of the MSD. Better to use a plain old non advance inductive timing light. Maybe that's why my timing is Wayyy off? Anybody know if a Fluidampr can spin like a normal balancer? Anybody ever have any problems with setting timing?

http://www.msdignition.com/forum/showthread.php?t=10372&highlight=timing+light
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 10, 2008
#2
  • Jan 10, 2008
  • #2
I agree that the multiple sparks are what throw the timing light off. Would it not be simpler to just circumvent the box when you set timing? It's real easy if you got the adapter harness that MSD/Crane/others offer.

Good luck.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 10, 2008
#3
  • Jan 10, 2008
  • #3
Yea I do have the quick disconnect harness, I just read about this so I thought I could do that. But is it possible for a Fluidampr to spin like a normal balancer outer can spin on the inner? I had a balancer once that had spun 30 degrees so I put a new oem one on and all was good. Then I got a used fluidampr from a friend and I can't even see 10* with my advance timing light so I figured it must be this since a fluidampr is welded all the way around? and it timed fine with the new oem one.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 10, 2008
#4
  • Jan 10, 2008
  • #4
As you said, the fluid-style damper should not 'spin'. It's the elastomer in a conventional damper that allows spinning to occur. I'm not well versed in Fluid-style dampers however (I'm not at all a fan of them).

I would compare the timing marks on an OEM damper to where they are on your fluid-damper (in relation to somthing fixed, like the key). You're smart to ponder whether the marks are off, instead of just setting the timing and calling it good.

Good luck.
 
You must log in or register to reply here.

Similar threads

P
Engine '88 GT Carb'd, want to hook up MSD Box
  • pindude80
  • Apr 29, 2024
  • Fox 5.0 Mustang Tech
Replies
8
Views
2K
Fox 5.0 Mustang Tech May 20, 2024
limp
T
Resolved 1989 GT Slight Stutter Under Load
  • Tim83
  • Jun 26, 2023
  • Fox 5.0 Mustang Tech
Replies
4
Views
2K
Fox 5.0 Mustang Tech Jan 6, 2024
Mindseye007
J
Learning so much but still have some questions with megasquirt
  • Jweirnik
  • Aug 29, 2020
  • Digital Self-tuning Forum
Replies
1
Views
1K
Digital Self-tuning Forum Aug 31, 2020
a91what
Old H/c/i Installation Explanation And Pics
  • FastDriver
  • Jan 26, 2018
  • Fox 5.0 Mustang Tech
Replies
5
Views
2K
Fox 5.0 Mustang Tech Jan 27, 2018
FastDriver
S
Fox Wont Start And Cant Figure It Out
  • smigstang
  • Feb 1, 2016
  • Fox 5.0 Mustang Tech
Replies
2
Views
7K
Fox 5.0 Mustang Tech Feb 5, 2016
smigstang
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?