MSD boxes messing up timing light readings

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Anybody ever have timing light problems with their MSD boxes? I found a thread how the fancier timing lights with built in tachs and advance gets confused readings from the capacitive discharge and the multiple sparks of the MSD. Better to use a plain old non advance inductive timing light. Maybe that's why my timing is Wayyy off? :rolleyes: Anybody know if a Fluidampr can spin like a normal balancer? Anybody ever have any problems with setting timing?

http://www.msdignition.com/forum/showthread.php?t=10372&highlight=timing+light
 
I agree that the multiple sparks are what throw the timing light off. Would it not be simpler to just circumvent the box when you set timing? It's real easy if you got the adapter harness that MSD/Crane/others offer.

Good luck.
 
Yea I do have the quick disconnect harness, I just read about this so I thought I could do that. But is it possible for a Fluidampr to spin like a normal balancer outer can spin on the inner? I had a balancer once that had spun 30 degrees so I put a new oem one on and all was good. Then I got a used fluidampr from a friend and I can't even see 10* with my advance timing light so I figured it must be this since a fluidampr is welded all the way around? and it timed fine with the new oem one.
 
As you said, the fluid-style damper should not 'spin'. It's the elastomer in a conventional damper that allows spinning to occur. I'm not well versed in Fluid-style dampers however (I'm not at all a fan of them).

I would compare the timing marks on an OEM damper to where they are on your fluid-damper (in relation to somthing fixed, like the key). You're smart to ponder whether the marks are off, instead of just setting the timing and calling it good.

Good luck.