MSD Help Please

88Stangboy said:
Take one of your plug wires and just temporarily use it for a coil wire and see what happens....Hell its worth a shot...
Double check a diagram and make sure you got your wires attached to the right sides of the coil, may seem basic, but its happend to me before. I replaced an entire fuel pump and relay and it turned out i left the positive wire off up in the engine bay. But what may have happend is that the old coil was bad, you installed the new one but got a wire crossed...you never know. Check your work against an MSD wiring diagram

I was thinking about a plug wire as the coil wire.... But I am just going to test the resistance of the wires (theres a zip tie wire loom and i dont have more zip ties)...LOL I have MSD's wiring diagrams printed up and on the windshield under with wiper blade for quick reference... I have double and triple checked the wireing....I am going to rewire it today since i pulled it all out yesterday to be tested.


Oh the battery is dead now, 2 days of trouble shooting. Its finaly drained completely. So its time to charge it up.

The megnetic pick up in the distributor tested good.
 
Alright its really pissing me off..... While I had the 6A box out a wire apparently grounded out and well I was fored to rewire the MSD, Electric Fan, and Nitrous. So all the wiring is new.

We called MSD tech support, they walked us through trouble shooting our set up. They said that the 6A box was bad. So we replaced it.

SO MDS 6A, Blaster SS coil, magnetic pick up in distributor, and wiring have all been replaced. Still no spark out of the coil. It was running fine Saturday then just died sitting at a traffic light.

Help me i am loosing my mind one this thing.